[SunHELP] how to tell how much cache my system has...

[Frank-Christian Kruegel]

On Fri, 8 Mar 2002 03:20:05 -0800 (PST), you wrote:

>I bought a Tatung Ultra 10 clone...  it has a 360mhz UltraSparc IIi, the
>concern is this.  There are two flavors with the 360mhz systems.  One has a
2mb
>cache and the other has a 256k cache.
>
>When I made the purchase I specified that I only wanted the one with the 2mb
>cache.  The person I bought it from confirmed this and sent it out.
>
>Now, I have no real reason to doubt this person, BUT I would like to make
sure,
>for my personal comfort, that I was indeed sent a system with 2mb of cache.
>
>Is there anyway to check this?

My 440 MHz UltraAXi system shows this:

Your machine should be about the same, only which a slower cpu clock.
The CPU section also shows the ECache size.

----
bash-2.03# /usr/platform/sun4u/sbin/prtdiag
System Configuration:  Sun Microsystems  sun4u
SPARCengine(tm)Ultra(tm) AXi (UltraSPARC-IIi 440MHz)
System clock frequency: 110 MHz
Memory size: 256 Megabytes

========================= CPUs =========================

                    Run   Ecache   CPU    CPU
Brd  CPU   Module   MHz     MB    Impl.   Mask
---  ---  -------  -----  ------  ------  ----
 0     0     0      440     2.0   12       9.0


========================= IO Cards =========================

     Bus   Freq
Brd  Type  MHz   Slot  Name                              Model
---  ----  ----  ----  --------------------------------
----------------------
 0   PCI    66     1   network-SUNW,hme
 0   PCI    66     1   scsi-glm/disk (block)
Symbios,53C875
 0   PCI    66     1   scsi-glm/disk (block)
Symbios,53C875
 0   PCI    66     2   scsi-glm/disk (block)
Symbios,53C875
 0   UPA   110    30   FFB, Double Buffered              SUNW,501-4788

No failures found in System
===========================

Mit freundlichen Gr|_en

Dipl.-Ing. Frank-Christian Kr|gel
IstDa Kommunikationssysteme