[rescue] T5220 update

[Lionel Peterson]

bshow /SYSb, executed immediately after bstart /SYSb shows all the
targets, the Properties, and then commands.

Under Properties, the only things that look interesting are bkeyswitch_state
= Normalb,  bfault_state = OKb and bpower_state = Offb.

Lionel

> On Oct 30, 2017, at 6:22 PM, Jerry Kemp <sun.mail.list47 at oryx.us> wrote:
>
> Lionel,
>
> after you have done a "start /SYS", what is the output of
>
> "show /SYS", again, logged into the iLOM ?
>
> Jerry
>
>
>> On 10/30/17 05:59 PM, Lionel Peterson wrote:
>> show faulty produces nothing:
>>
>> <<< start iLOM output >>>
>>
>> Waiting for daemons to initialize...
>> .
>> Daemons ready
>> Oracle(R) Integrated Lights Out Manager
>> Version 3.0.12.4.w r74569
>> Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
>> Warning: password is set to factory default.
>> -> show faulty
>> Target              | Property               | Value
>>
--------------------+------------------------+-------------------------------
--
>> -> start /SYS
>> Are you sure you want to start /SYS (y/n)? y
>> Starting /SYS
>> -> show faulty
>> Target              | Property               | Value
>>
--------------------+------------------------+-------------------------------
--
>> ->
>>
>>>>> end iLOM output <<<
>>
>> Tee system stays powered on for about 15-20 seconds. What confounds me
>> is that his is new behavior, when I first got the server, this wasn't
>> the case - it stayed up until I stopped it.
>>
>> Odd. I think it has to do with environmental settings, but I need to
>> focus on other issues for awhile...
>>
>> Any thoughts/insights appreciated,
>>
>> Lionel
>>
>>> On Mon, Oct 30, 2017 at 5:12 PM, Lionel Peterson <lionel4287 at gmail.com>
wrote:
>>> OK, kinda stumped here.
>>>
>>> Plug in two HDs, have burned DVD 2/3rds in drive (won't go in further)
>>>
>>> power on server through iLOM (log in as default user "root" with
>>> default password of "changeme")
>>>
>>> then I try and start system, I get this:
>>>
>>> <<< start output from iLOM >>>
>>>
>>> -> start /SYS
>>> Are you sure you want to start /SYS (y/n)? y
>>> Starting /SYS
>>> -> start /SP/console
>>> Are you sure you want to start /SP/console (y/n)? y
>>> Serial console started.  To stop, type #.
>>> \
>>>
>>>>>> end output from iLOM <<<
>>>
>>> and the system powers down (no fan noise) and I have to enter #. to
>>> get back to iLOM prompt.
>>>
>>> the power light is blinking, holding in power buttion turns on server,
>>> but it quickly shuts down.
>>>
>>> it didn't do this before, might there be an 'intrusion switch" or
>>> other that is having it shutdown.
>>>
>>> The server on power-up has no bootable media, does it just give up
>>> when it finds none?
>>>
>>> Thoughts? System appears properly closed, I've got a network drop
>>> plugged into NET MGMGT jack, serial cord plugged into SER MGMT.
>>>
>>> Thanks,
>>>
>>> Lionel
>>>
>>>
>>>> On Mon, Oct 30, 2017 at 1:20 PM, Steve Hatle <shatle at nfldinet.com>
wrote:
>>>> --------- Original Message --------- Subject: [rescue] T5220 update
>>>> From: "Lionel Peterson" <lionel4287 at gmail.com>
>>>> Date: 10/29/17 11:09 am
>>>> To: rescue at sunhelp.org
>>>>
>>>>
>>>>
>>>> I asked about rails, and a couple list members offered to look in their
junk
>>>> closet for suitable boutsideb rails (there are binsideb rails attached
>>>> to the server). I was going to look for matching/suitable part numbers,
but
>>>> havenbt had time (yet), thanks for the offers, Ibve not forgotten you.
>>>>
>>>> I just may have the outside rails for this. I'll snap a pic in the next
day or
>>>> so and send it along. If they work, they're all yours.
>>>>
>>>> Steve
>>>> _______________________________________________
>>>> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
>>>
>>>
>>>
>>> --
>>> Lionel Peterson
>>> lionel4287 at gmail.com
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue