[rescue] T5220 update

Peter Stokes peter at ashlyn.co.uk
Tue Oct 31 01:58:39 CDT 2017


Hi Lionel

I have seen the 'power on for a few seconds and then switch off' is due to a
config issue with memory type/configuration, did you say you had reconfigured
it yet?

Peter
---------------------------
Peter Stokes
Ashlyn Computer Services
Mbl: 07977 532320
---------------------------




On 31 Oct 2017, at 00:13, Lionel Peterson <lionel4287 at gmail.com> wrote:

> bshow /SYSb, executed immediately after bstart /SYSb shows all the
> targets, the Properties, and then commands.
>
> Under Properties, the only things that look interesting are
bkeyswitch_state
> = Normalb,  bfault_state = OKb and bpower_state = Offb.
>
> Lionel
>
>> On Oct 30, 2017, at 6:22 PM, Jerry Kemp <sun.mail.list47 at oryx.us> wrote:
>>
>> Lionel,
>>
>> after you have done a "start /SYS", what is the output of
>>
>> "show /SYS", again, logged into the iLOM ?
>>
>> Jerry
>>
>>
>>> On 10/30/17 05:59 PM, Lionel Peterson wrote:
>>> show faulty produces nothing:
>>>
>>> <<< start iLOM output >>>
>>>
>>> Waiting for daemons to initialize...
>>> .
>>> Daemons ready
>>> Oracle(R) Integrated Lights Out Manager
>>> Version 3.0.12.4.w r74569
>>> Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
>>> Warning: password is set to factory default.
>>> -> show faulty
>>> Target              | Property               | Value
>>>
>
--------------------+------------------------+-------------------------------
> --
>>> -> start /SYS
>>> Are you sure you want to start /SYS (y/n)? y
>>> Starting /SYS
>>> -> show faulty
>>> Target              | Property               | Value
>>>
>
--------------------+------------------------+-------------------------------
> --
>>> ->
>>>
>>>>>> end iLOM output <<<
>>>
>>> Tee system stays powered on for about 15-20 seconds. What confounds me
>>> is that his is new behavior, when I first got the server, this wasn't
>>> the case - it stayed up until I stopped it.
>>>
>>> Odd. I think it has to do with environmental settings, but I need to
>>> focus on other issues for awhile...
>>>
>>> Any thoughts/insights appreciated,
>>>
>>> Lionel
>>>
>>>> On Mon, Oct 30, 2017 at 5:12 PM, Lionel Peterson <lionel4287 at gmail.com>
> wrote:
>>>> OK, kinda stumped here.
>>>>
>>>> Plug in two HDs, have burned DVD 2/3rds in drive (won't go in further)
>>>>
>>>> power on server through iLOM (log in as default user "root" with
>>>> default password of "changeme")
>>>>
>>>> then I try and start system, I get this:
>>>>
>>>> <<< start output from iLOM >>>
>>>>
>>>> -> start /SYS
>>>> Are you sure you want to start /SYS (y/n)? y
>>>> Starting /SYS
>>>> -> start /SP/console
>>>> Are you sure you want to start /SP/console (y/n)? y
>>>> Serial console started.  To stop, type #.
>>>> \
>>>>
>>>>>>> end output from iLOM <<<
>>>>
>>>> and the system powers down (no fan noise) and I have to enter #. to
>>>> get back to iLOM prompt.
>>>>
>>>> the power light is blinking, holding in power buttion turns on server,
>>>> but it quickly shuts down.
>>>>
>>>> it didn't do this before, might there be an 'intrusion switch" or
>>>> other that is having it shutdown.
>>>>
>>>> The server on power-up has no bootable media, does it just give up
>>>> when it finds none?
>>>>
>>>> Thoughts? System appears properly closed, I've got a network drop
>>>> plugged into NET MGMGT jack, serial cord plugged into SER MGMT.
>>>>
>>>> Thanks,
>>>>
>>>> Lionel
>>>>
>>>>
>>>>> On Mon, Oct 30, 2017 at 1:20 PM, Steve Hatle <shatle at nfldinet.com>
> wrote:
>>>>> --------- Original Message --------- Subject: [rescue] T5220 update
>>>>> From: "Lionel Peterson" <lionel4287 at gmail.com>
>>>>> Date: 10/29/17 11:09 am
>>>>> To: rescue at sunhelp.org
>>>>>
>>>>>
>>>>>
>>>>> I asked about rails, and a couple list members offered to look in their
> junk
>>>>> closet for suitable boutsideb rails (there are binsideb rails attached
>>>>> to the server). I was going to look for matching/suitable part numbers,
> but
>>>>> havenbt had time (yet), thanks for the offers, Ibve not forgotten you.
>>>>>
>>>>> I just may have the outside rails for this. I'll snap a pic in the next
> day or
>>>>> so and send it along. If they work, they're all yours.
>>>>>
>>>>> Steve
>>>>> _______________________________________________
>>>>> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
>>>>
>>>>
>>>>
>>>> --
>>>> Lionel Peterson
>>>> lionel4287 at gmail.com
>> _______________________________________________
>> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue


More information about the rescue mailing list