[rescue] T5220 update

[Jerry Kemp]

Lionel,

after you have done a "start /SYS", what is the output of

"show /SYS", again, logged into the iLOM ?

Jerry


On 10/30/17 05:59 PM, Lionel Peterson wrote:
> show faulty produces nothing:
>
> <<< start iLOM output >>>
>
> Waiting for daemons to initialize...
> .
> Daemons ready
> Oracle(R) Integrated Lights Out Manager
> Version 3.0.12.4.w r74569
> Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
> Warning: password is set to factory default.
> -> show faulty
> Target              | Property               | Value
> --------------------+------------------------+---------------------------------
> -> start /SYS
> Are you sure you want to start /SYS (y/n)? y
> Starting /SYS
> -> show faulty
> Target              | Property               | Value
> --------------------+------------------------+---------------------------------
> ->
>
>>>> end iLOM output <<<
>
> Tee system stays powered on for about 15-20 seconds. What confounds me
> is that his is new behavior, when I first got the server, this wasn't
> the case - it stayed up until I stopped it.
>
> Odd. I think it has to do with environmental settings, but I need to
> focus on other issues for awhile...
>
> Any thoughts/insights appreciated,
>
> Lionel
>
> On Mon, Oct 30, 2017 at 5:12 PM, Lionel Peterson <lionel4287 at gmail.com> wrote:
>> OK, kinda stumped here.
>>
>> Plug in two HDs, have burned DVD 2/3rds in drive (won't go in further)
>>
>> power on server through iLOM (log in as default user "root" with
>> default password of "changeme")
>>
>> then I try and start system, I get this:
>>
>> <<< start output from iLOM >>>
>>
>> -> start /SYS
>> Are you sure you want to start /SYS (y/n)? y
>> Starting /SYS
>> -> start /SP/console
>> Are you sure you want to start /SP/console (y/n)? y
>> Serial console started.  To stop, type #.
>> \
>>
>>>>> end output from iLOM <<<
>>
>> and the system powers down (no fan noise) and I have to enter #. to
>> get back to iLOM prompt.
>>
>> the power light is blinking, holding in power buttion turns on server,
>> but it quickly shuts down.
>>
>> it didn't do this before, might there be an 'intrusion switch" or
>> other that is having it shutdown.
>>
>> The server on power-up has no bootable media, does it just give up
>> when it finds none?
>>
>> Thoughts? System appears properly closed, I've got a network drop
>> plugged into NET MGMGT jack, serial cord plugged into SER MGMT.
>>
>> Thanks,
>>
>> Lionel
>>
>>
>> On Mon, Oct 30, 2017 at 1:20 PM, Steve Hatle <shatle at nfldinet.com> wrote:
>>> --------- Original Message --------- Subject: [rescue] T5220 update
>>> From: "Lionel Peterson" <lionel4287 at gmail.com>
>>> Date: 10/29/17 11:09 am
>>> To: rescue at sunhelp.org
>>>
>>>
>>>
>>>  I asked about rails, and a couple list members offered to look in their junk
>>>  closet for suitable boutsideb rails (there are binsideb rails attached
>>>  to the server). I was going to look for matching/suitable part numbers, but
>>>  havenbt had time (yet), thanks for the offers, Ibve not forgotten you.
>>>
>>> I just may have the outside rails for this. I'll snap a pic in the next day or
>>> so and send it along. If they work, they're all yours.
>>>
>>> Steve
>>> _______________________________________________
>>> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
>>
>>
>>
>> --
>> Lionel Peterson
>> lionel4287 at gmail.com