[geeks] Linksys pap2-na power requirements

[Lionel Peterson]

>From: Chad McAuley <chizad at gmail.com>
>Date: 2006/09/13 Wed AM 09:26:12 CDT
>To: The Geeks List <geeks at sunhelp.org>
>Subject: Re: [geeks] Linksys pap2-na power requirements

>On 9/13/06, Geoffrey S. Mendelson <gsm at mendelson.com> wrote:
>>
>> Someone gave me a used linksys PAP2-NA unit without an AC adaptor.
>>
>> If you have one would you please let me know the power requiremnts
>> (voltage, current and polarity) for it.
>>
>> Thanks, Geoff.
>
>
>
>According to the specs on the Linksys site it looks like it's 5VDC @ 2.0A
>.  Polarity info isn't listed, but that should give you a good starting point.

5 VDC, 2.0 A, center positive, sleeve negative

I forgot I had one of these...

Lionel