[SunHELP] polled cmd failed.

[Yazid]

Issue a reset command after a break. You need to set auto-boot to false to
prevent the system to boot automatically. Try something like below:

<stop-A>
setenv auto-boot? false
reset-all
probe-scsi-all
boot cdrom

Verify that all your scsi devices are detected properly by probe-scsi-all
command, if not check the scsi link (attached properly, no target number
conflict, and terminated)

cheers,

On 10/8/07, abs <abhishake00 at yahoo.com> wrote:
>
> hello all,
> i am a relative newbie so please excuse my ignorance.  i am trying to
> install solaris 10 on a sun enterprise 3000.  i issue a break to enter the
> openboot prompt at which point i issue a 'boot cdrom'.  but everytime i do
> so i can the following error:
>
> {6} ok boot cdrom
> Boot device: /sbus at 3,0/SUNW,fas at 3,8800000/sd at 6,0:f  File and args:
> Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
> FCode UFS Reader 1.12 00/07/17 15:48:16.
> Redirected to slice: 1
> Loading: /platform/SUNW,Ultra-Enterprise/ufsboot
> Loading: /platform/sun4u/ufsboot
> SunOS Release 5.10 Version Generic_120011-14 64-bit
> Copyright 1983-2007 Sun Microsystems, Inc.  All rights reserved.
> Use is subject to license terms.
> os-io Configuring devices.
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Target 12 rejects our message 'BUS DEVICE RESET'
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Polled cmd failed
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000/sd at 6,0 (sd6):
>         SCSI transport failed: reason 'reset': retrying command
>
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Target 12 rejects our message 'BUS DEVICE RESET'
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Polled cmd failed
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000/sd at 6,0 (sd6):
>         Error for Command: read(10)                Error Level: Retryable
>         Requested Block: 994176                    Error Block: 994176
>         Vendor: TOSHIBA                            Serial Number:
> 708/27/97
>         Sense Key: Unit Attention
>         ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0,
> FRU: 0x0
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Target 12 rejects our message 'BUS DEVICE RESET'
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Polled cmd failed
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Target 12 rejects our message 'BUS DEVICE RESET'
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Polled cmd failed
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000/sd at 6,0 (sd6):
>         Error for Command: read(10)                Error Level: Retryable
>         Requested Block: 994176                    Error Block: 994176
>         Vendor: TOSHIBA                            Serial Number:
> 708/27/97
>         Sense Key: Unit Attention
>         ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0,
> FRU: 0x0
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Target 12 rejects our message 'BUS DEVICE RESET'
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Polled cmd failed
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Target 12 rejects our message 'BUS DEVICE RESET'
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Polled cmd failed
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000/sd at 6,0 (sd6):
>         Error for Command: read(10)                Error Level: Retryable
>         Requested Block: 994176                    Error Block: 994176
>         Vendor: TOSHIBA                            Serial Number:
> 708/27/97
>         Sense Key: Unit Attention
>         ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0,
> FRU: 0x0
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Target 13 rejects our message 'BUS DEVICE RESET'
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Polled cmd failed
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Target 13 rejects our message 'BUS DEVICE RESET'
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000 (fas0):
>         Polled cmd failed
> WARNING: /sbus at 3,0/SUNW,fas at 3,8800000/sd at 6,0 (sd6):
>         Error for Command: read(10)                Error Level: Retryable
>         Requested Block: 994176                    Error Block: 994176
>         Vendor: TOSHIBA                            Serial Number:
> 708/27/97
>
> and it continues to output this and does not progress any further.  i am
> unsure as to why this error is occuring.  i want to say it is the cdrom
> drive but am not sure.  would anyone be able to point me in the right
> direction?  any help is appreciated.  thank you very much.
>
> cheers
>
>
> ---------------------------------
> Boardwalk for $500? In 2007? Ha!
> Play Monopoly Here and Now (it's updated for today's economy) at Yahoo!
> Games.
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp