[SunHELP] ultra-1 and quantum hard drive problem

[Arthur Wouk]

i have an ultra-1 creator with200mhz cpu.

it has four hard drives: two internal sca 
drives, one external 50-pin seagate 9gig drive in a 411 box, connected 
with a 68-pin to 50pin cable, and a Quantum ATLAS10K2-TY734J73gig
drive in a 611 box connected via a 68 pin to 68pin scsi cable.

the first three are seen by both probe-scsi and format. the quantum is
not seen by either probe-scsi or format, but during boot it is seen
and rejected. i separate the relevant messages from a boot with all four
connected by a line of = signs.

it has been suggested to me that this large a drive responds with a
self test to the load/stop/start command, and the self test takes more
time than the computer allows for startup. if this is so, then a much
smaller drive, say an 18gig one, might be a better replacement.  or
lese, it might be a jumper problem on the hard drive.

this is the second such quantum drive i have tried in this configuration.

anyone have any experience, or suggestions?

Apr  9 16:36:02 ultra genunix: [ID 936769 kern.info] fas0 is /sbus at 1f,0/SUNW,fas at e,8800000
Apr  9 16:36:02 ultra scsi: [ID 193665 kern.info] sd0 at fas0: target 0 lun 0
Apr  9 16:36:02 ultra genunix: [ID 936769 kern.info] sd0 is /sbus at 1f,0/SUNW,fas at e,8800000/sd at 0,0
Apr  9 16:36:02 ultra scsi: [ID 365881 kern.info] 	<SUN4.2G cyl 3880 alt 2 hd 16 sec 135>
Apr  9 16:36:02 ultra scsi: [ID 193665 kern.info] sd1 at fas0: target 1 lun 0
Apr  9 16:36:02 ultra genunix: [ID 936769 kern.info] sd1 is /sbus at 1f,0/SUNW,fas at e,8800000/sd at 1,0
Apr  9 16:36:02 ultra scsi: [ID 365881 kern.info] 	<SUN2.1G cyl 2733 alt 2 hd 19 sec 80>
Apr  9 16:36:02 ultra scsi: [ID 193665 kern.info] sd2 at fas0: target 2 lun 0
Apr  9 16:36:02 ultra genunix: [ID 936769 kern.info] sd2 is /sbus at 1f,0/SUNW,fas at e,8800000/sd at 2,0
Apr  9 16:36:02 ultra scsi: [ID 365881 kern.info] 	<SEAGATE-ST19171N-0016 cyl 5266 alt 2 hd 20 sec 168>

================================================================================

Apr  9 16:36:04 ultra scsi: [ID 107833 kern.warning] WARNING: /sbus at 1f,0/SUNW,fas at e,8800000/sd at 3,0 (sd3):
Apr  9 16:36:04 ultra 	Error for Command: load/start/stop         Error Level: Retryable
Apr  9 16:36:04 ultra scsi: [ID 107833 kern.notice] 	Requested Block: 0                         Error Block: 0
Apr  9 16:36:04 ultra scsi: [ID 107833 kern.notice] 	Vendor: QUANTUM                            Serial Number: 167118040223
Apr  9 16:36:04 ultra scsi: [ID 107833 kern.notice] 	Sense Key: Not Ready
Apr  9 16:36:04 ultra scsi: [ID 107833 kern.notice] 	ASC: 0x4 (<vendor unique code 0x4>), ASCQ: 0x88, FRU: 0x0
Apr  9 16:36:09 ultra scsi: [ID 107833 kern.warning] WARNING: /sbus at 1f,0/SUNW,fas at e,8800000/sd at 3,0 (sd3):
Apr  9 16:36:09 ultra 	Error for Command: load/start/stop         Error Level: Retryable
Apr  9 16:36:09 ultra scsi: [ID 107833 kern.notice] 	Requested Block: 0                         Error Block: 0
Apr  9 16:36:09 ultra scsi: [ID 107833 kern.notice] 	Vendor: QUANTUM                            Serial Number: 167118040223
Apr  9 16:36:09 ultra scsi: [ID 107833 kern.notice] 	Sense Key: Not Ready
Apr  9 16:36:09 ultra scsi: [ID 107833 kern.notice] 	ASC: 0x4 (<vendor unique code 0x4>), ASCQ: 0x88, FRU: 0x0
Apr  9 16:36:12 ultra scsi: [ID 193665 kern.info] sd3 at fas0: target 3 lun 0
Apr  9 16:36:12 ultra genunix: [ID 936769 kern.info] sd3 is /sbus at 1f,0/SUNW,fas at e,8800000/sd at 3,0
Apr  9 16:36:12 ultra scsi: [ID 365881 kern.info] 	Vendor 'QUANTUM', product 'ATLAS10K2-TY734J', 143443640 512 byte blocks