[SunHELP] Boot cdrom on ultra10

sunhelp at sunhelp.org sunhelp at sunhelp.org
Mon Jul 2 16:39:14 CDT 2001


> -----Original Message-----
> Behalf Of anna menshch
> The CDrom is not original to the system.  It is an older machine and has
> atapi CDRom not a scsi one.

 I'm confused a bit by this. You say that this CD-Rom drive
isn't the original one to the u10 and came from an older
machine, but the part number that you mention is for a 32x
ATAPI drive that is shipped with u5s and u10s originally.
 Can you clarify this somewhat?

> -----Original Message-----
> Behalf Of anna menshch
> I checked the CD, it works fine on other machines.

 Did you try to boot the CD on any other machines? As
pointed out already, there is a difference between
booting to a CD versus just being able to read it on 
a running system.

> 
> I think that it might be happening because it is not a scsi cdrom.  But I

 Nope, Sun systems can boot to non-SCSI cdroms (hdds too).

> I tried to boot c0t2d0 this is what df -k showed.  Did not work.

 Can you write down the full physical path from doing the
following command? (Assuming that c0t2d0 is output from
the u10 and not a different machine that you used to 
read the CD) Showing us the df -k output which refers
to the CD-Rom drive wouldn't hurt, either.

 # ls -la /dev/dsk/c0t2d0

 Also can you show us the output of the following two
commands (to be executed from the OpenBoot Prom)?

 ok show-devs
 ok devalias

 More than likely you just need to create a proper
'cdrom' alias for your OBP environment.

 -david




More information about the SunHELP mailing list