[Sunhelp] manual mount of IDE CD-ROM on Solaris 2.6 (x_86)

[blake r matheny]

--openmail-part-28b4aa26-00000001
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Robert,
I got some info for you from Sun on SunRay's. Unfortunately my email 
system will not allow me to send it out because it's 10 megs. It's some 
CD that they gave out at a show I was just out, I just tarred it up. If 
you want it let me know of a place that I can ftp it to and that you 
can retrieve it from.
-Blake

-----Original Message-----
From: robert.fuerst [mailto:robert.fuerst at sylvania.com]
Sent: Friday, September 15, 2000 5:40 AM
To: sunhelp
Subject: RE: [Sunhelp] manual mount of IDE CD-ROM on Solaris 2.6 (x_86)



have you tried 
mount -F nfs -o ro /dev/dsk/c1d0s0 /cdrom 

guess I am confused also because on unix all (my drives anyway) have 
c's,t's,d's,and s's 

so perhaps it's really /dev/dsk/c0t1d0s0? 

Not sure at all on ide stuff... 

	-----Original Message----- 
From:   Irwin R. Naumann [SMTP:irwin at thinkage.ca] 
Sent:   Thursday, September 14, 2000 4:08 PM 
To:     sunhelp at sunhelp.org 
Subject:        [Sunhelp] manual mount of IDE CD-ROM on Solaris 2.6 
(x_86) 

	I installed the 2.6 Core distribution on a Pentium Pro with two 
IDE disks and 
an IDE CD-ROM. 

	The initial install from CD-ROM displayed 
  isa/ata at 170,0/cmdk at 0,0:a. 

	I did a "ls -al /dev/dsk/* | grep 170 | grep :a" which returned 
lrwxrwxrwx ... /dev/dsk/c1d0s0 -> 
../../devices/isa/ata at 1,170/cmdk at 0,0:a. 

	I attempted "mount -rF hsfs /dev/dsk/c1d0s0 /cdrom" which returned 
"hsfs mount: /dev/dsk/c1d0s0 is not an hsfs file system". 

	How does one do a manual mount of the CD-ROM? 

	Thanks, 

	    Irwin 
_______________________________________________ 
SunHELP maillist  -  SunHELP at sunhelp.org 
http://www.sunhelp.org/mailman/listinfo/sunhelp 




--openmail-part-28b4aa26-00000001--