[rescue] Memory upgrade in Dell PowerEdge 2560

[Chad Fernandez]

On 05/27/2015 02:21 PM, Patrick Giagnocavo wrote:
> I would suggest putting in the minimum memory you can, running memtest on
> that.  Then swap out, 1 by 1, each DIMM and see if you get
> failure/success.  It could even be that a certain memory slot has failed.

Seven won't pass post, when installed individually.  There is no way I 
can run memtest on them.  A bad slot occurred to me, as well.  One of 
those seven would work as long as it was the second stick, but would not 
work as the first.  I don't have another stick of ram, of the same 
speed, that actually works, to move the "good" one to the second slot.

Chad Fernandez
Michigan, USA