[rescue] Sun E450 - 'CPU Fan 2 Failure' but not failed

[Greg Jurman]

On Nov 10, 2013 2:37 AM, <microcode at zoho.com> wrote:
>
> I am able to get to the site via archive.org (look for an old copy, it
> hasn't been updated meaningfully in over a decade anyway) and all the doc
> links still appear good but I can't find the pages I *thought* had local
> copies of obp etc. Sorry if this was a wild goose chase. I know I came
> across copies of that stuff somewhere, but I didn't grab it because I
don't
> have any hardware that it would work with. I will try not to make that
> mistake again.
>

Not a problem. I'll look for the file tomorrow. The page I found had the
link to the tarball for the firmware but the ftp it was linking to is down.

There still is a few other things I'm going to try as I haven't cleaned it
as thoroughly as I've cleaned my SGI Octane. I'm hoping either a firmware
re-flash or complete and thorough board and connector cleaning is all it
needs.

I'll post later if I come up with anything.
_______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue