[rescue] reset firmware password on sun blade 150

[Nicolai]

On Thu, Mar 18, 2010 at 03:34:10PM -0500, Nicolai wrote:
> On Wed, Mar 17, 2010 at 05:47:04PM -0500, Jonathan Patschke wrote:
> > If you can't boot the system and get root, boot the system without the
> > NVRAM chip, install it (correctly!) while at the OpenBoot prompt, and then
> > run the mkp commands.
> 
> To clarify

Sorry all, just disregard that nonsense.  Was looking at too many things
at the same time.

All is well now... I followed the steps described in that blog post I
mentioned:

  http://blog.jasonantman.com/2007/12/sun-blade-150-working

And now have a working Sun Blade 150, firmware password removed.  In
short, I booted the machine and at the OpenBoot prompt, removed the
NVRAM, then reinserted it, rebooted with Stop-N and set-defaults.

Thanks for your help!

Nicolai