[rescue] IO board+ on e5000

[Francois Dion]

If I put a 501-4883 io board with soc+ in my e5000, does that require
that I have a specific clock board, or cpu/mem version (does it have
to be the 4882)?

The reason i'm asking is that I swapped the old IO for the IO+ and I get a
POST:

Hardware Power ON
0,0>FATAL ERROR
0,0>    At time of error: POST was testing Board 1 SYSIO 0 ASIC U2700
0,0>    Diagnosis: Board 0, any system board MTIMEOUT (target of operation)
0,0>    Diagnosis: Board 1, UPA PORT Device, AC
0,0>Log Date: Dec 15 13:38:31 GMT 2005
0,0>
0,0>RESET INFO for CPU/Memory  board in slot 0
0,0>    AC ESR 00000000.01000001 MTIMEOUT UPA_A_ERR
0,0>    DC[0] 00
0,0>    DC[1] 00
0,0>    DC[2] 00
0,0>    DC[3] 00
0,0>    DC[4] 00
0,0>    DC[5] 00
0,0>    DC[6] 00
0,0>    DC[7] 00
0,0>    FHC  CSR 00050200 LOC_FATAL SYNC NOT_BRD_PRES
0,0>    FHC RCSR 02000000  FATAL


So on and so forth for all my cpu/mem boards. These CPU/MEM boards are
of the 83mhz variety, altough I have some on their way that I will
swap (to get to 100mhz).

Or do I have a dead IO+ board?

Francois