[SunRescue] Starter systems...

[Gil Young]

I correct me if I am wrong, but didn't the SS10 or 20 also have a memory 
slot for the built-in prestoserve technology?  I seem to remember one of 
the models had this built in, but I can't remember which one.

At 03:20 PM 4/10/01 -0400, you wrote:
><SNIP>
>There was only one version of SS/20 that I am aware of, but I could be 
>wrong. All SS/20s I am aware of can take 4 or 8 Meg VSIMMs to activate the 
>on-board framebuffer, all can take up to two MBUS modules, and each MBUS 
>module can have up to two CPUs (your ability to mix-and-match CPU 
>speeds/models may vary, based on OBPROM revision level).
>
>I think you are confusing the SS/10 SX with what you are referring to as 
>an SS/20 sx - the SS/10 SX is an SS/10 with an on-board framebuffer 
>capability, similar to the one included on all SS/20s. A plain SS/10 
>system has no on-board provision for a framebuffer, it is added via the 
>SBUS slots.
>
><SNIP>
>HTH,
>
>Ken

Gil Young
Call Sign: KG4KVX
-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GIT/AT d+ s+:+ a C++ US++++ P+ L+ E--- W++ N+ o K+ w O- M+ V
PS PE+ Y+ PGP t+ 5 X+ R tv b+ DI+ D++ G e++ h--- r+++ y+++
------END GEEK CODE BLOCK------