[SunRescue] Got a 5 buckeroo 4/150 box today ... what to do with it?

Creasey sammy at oh.verio.com
Fri Sep 29 19:49:56 CDT 2000


On Fri, 29 Sep 2000, BSD Bob the old greybeard BSD freak wrote:

> In this weeks dumpster dive at the MooU surplus pit, I chanced upon an
> orphan 4/160 machine (6 slot case), with some kind of wierd 2/slot
> graphics card.  The CPU is a 501-1514, and the graphics thing is a
> 501-1447.  I did not see a ram card in the box, so my expectation is
> that ram is on the cpu board, maybe.  Is there anything else I should
> look at on this thing, before I try to bring it up?  Is the 4/xxx series
> machine capable of booting from CD, or will it only net/tape boot?

Ok, I've got sitting in my office a rescued 4/260 with a board similar to
this in it...   below is a message I got when asking about it on this
list, as to what the graphics thing is. :)


"UN-altered REPRODUCTION and DISSEMINATION of this IMPORTANT
Information is ENCOURAGED, ESPECIALLY to COMPUTER BULLETIN BOARDS."
	-- Robert E. McElwaine



---------- Forwarded message ----------
Date: Fri, 28 Jul 2000 11:50:36 -0400 (EDT)
From: Jonathan Katz <jon at jonworld.com>
Reply-To: rescue at sunhelp.org
To: rescue at sunhelp.org
Subject: Re: [SunRescue] some sort of video capture board?

On Fri, 28 Jul 2000, Creasey wrote:

:bearing labels S/R/G/B.  Barcode identifier says 501138302131 (presumably
:part nr 501-1383?)

This is known as the 'TAAC-1 Application Accelerator' p/n 501-1383 and 
501-1447 (later rev.) It looks to be a graphics co-processor type-card.

It is supposed to show up as /dev/taac0 under SunOS. 

FWIW from the notes in the last FE Handbook for Sun4 parts it says:

1.Do not disassemble the two-board assembly. 
2.The TAAC-1 is not supported with the Sun-2 Color Frame Buffer. 
3.The TAAC-1 is not supported with the CG9 Color Frame Buffer. 
4.Jumpers JB201-JB204 are hardwired for 16K x 4K RAM. 
5.TAAC-1 is not supported under Solaris 2.x (SunOS 5.x). 

These originally shipped with the 2/130 and 2/160 and were also found in
the 4/260/280/360/370/380/390/470/490s

>From what I can gather on various Field notices you'd run your graphics
output from your framebuffer (CG3/CG6, the p/n 501-1447 support CG9s)
through this card and then to your monitor. The field notices I found
explain that when people upgraded monitors and such they needed a new
set of cables (because of the move from BNC->13w3.) 

This is all 'book knowledge'-- has anyone used them hands-on?

-- 
Jonathan Katz
e-mail: jon at jonworld.com 
website: http://jonworld.com
proprietor: http://bachelor-cooking.com
Cell: 317-698-4023 * Pager: 800-759-8888 1770869 * FAX: 530-688-5347

_______________________________________________
Rescue maillist  -  Rescue at sunhelp.org
http://www.sunhelp.org/mailman/listinfo/rescue








More information about the rescue mailing list