[geeks] Little Falls 2 System Power Consumpion Question

Nadine Miller velociraptor at gmail.com
Mon Dec 8 21:20:31 CST 2008


On Dec 8, 2008, at 6:06 AM, Mark Benson wrote:

> On 8 Dec 2008, at 11:29, Michael-John Turner wrote:
>
>> On Fri, Dec 05, 2008 at 07:10:37PM +0000, Mark Benson wrote:
>>> Do you guys think I could power all that on a Pico-PSU 80W adapter  
>>> run
>>> off a 60W brick?
>>
>> I have the same board and have no problems with it in a 'Noah'  
>> case[1] with
>> the supplied 80W brick and Pico PSU. My draw is probably less than  
>> yours
>> though - I'm using a 2.5" SATA HD and don't have any add-on cards  
>> installed
>> or USB devices connected.
>>
>> [1] http://www.mini-itx.com/store/?c=3#3988
>
> Thanks for all your many advices. I think I'll grab a 120W Pico and  
> a bigger power brick in the new year.
>
> My main problem is I am currently using a ATX case wit ha mini-ATX  
> PSU and the fan is rather noisy. I use the case because it has 2  
> 5.25" drive bays, one for my SATA cradle and one for the front  
> Audigy2 panel, plus room for another 2 3.5" devices inside. Combined  
> with the damned chipset fan on the 945 chipset controller it makes  
> the whole rig disappointingly loud. I though plonking a Pico and a  
> brick on would take one fan out of the equation, then I'd just have  
> to work on the chipset fan.
>
> Anyone else here tried to calm down the noise their Little Falls  
> board?

There's a lot of chatter about the noise generated by that 40mm fan on  
the osx86 fora, since that is a popular board to turn into a  
hackintosh.  Some suggest just putting an 80mm in there pointing at  
the side of the heat sink, others recommend an after-market 40mm that  
I don't have the link for at the moment.

Others have modded aftermarket heatsinks so they can be attached, but  
that probably goes a bit further than is wise, IMO.

I'd lean towards some sort of chimney adaptor that allows you to go up  
from 40mm to 80mm like there used to be for 80mm to 100/120mm before  
we got into all these fancy heatpipe-flowery thingamajigs for heatsinks.

=Nadine=



More information about the geeks mailing list