[SunHELP] Ultra 60 second hard drive

[Richard Skelton]

Hi,
Try setting auto-boot? to false then reset-all and probe-scsi-all

Paul Savage wrote:

>Just tried running probe-scsi-all from the boot prompt on a machine with 
>just one drive. It says this may cause the system to hang up. It said do 
>a reset-all which I did. Then at reboot when running probe-scsi-all the 
>same message came up. I proceeded and got a bus fault and had boot the 
>machine again. It seems U60's do not like probe-scsi-all. I know when I 
>do this on several of our  SS20 machines this commnd works fine. Will 
>install a second drive this weekend and do a boot -r. Will let you all 
>know what happens. Thanks for all of your help.
>
>Paul
>
>Phil Stracchino wrote:
>
>  
>
>>Paul Savage wrote:
>> 
>>
>>    
>>
>>>Yes, we powered down the machine, installed the second drive and powered up.
>>>When I do format after powerup it only shows the first drive. I have 
>>>done this on 3 U60 machines with all the same results.
>>>   
>>>
>>>      
>>>
>>You *did* perform a 'boot -r', of course....?
>>
>>
>> 
>>
>>    
>>
>_______________________________________________
>SunHELP maillist  -  SunHELP at sunhelp.org
>http://www.sunhelp.org/mailman/listinfo/sunhelp
>  
>

-- 



Cheers

Richard Skelton
Richard.Skelton at infineon.com
Infineon Technologies UK Ltd
Infineon House
Great Western Court
Hunts Ground Road
Stoke Gifford
Bristol
BS34 8HP
Tel +44(0)117 9528808