[SunHELP] Problem with Netra t 1125

[Michael Karl]

Hello again,

I've tried an Creator-3D- and a XVR100-Card in this Netra t1125 without
any positive result. BTW the Netra t1125 is an Ultra 60.

The only heartbeat of this machine is (via xterm from UE10) ...

# tip hardwire
connected
CC CCCCCb:C
C"C 92
             99-1$*24VV-ZVF-
UUFF-UF*UNUVB+F*C*UWUC+C-C-C/mbTb,B6C-T6Cb
Kbb,63Kb
337C%mm3f
63sC.fB;33C's7C>>sfC'C'3C'?>C'C'>C:C'C'C'o,o,C'C'C?o,C:C:?C8C:C?o,>8>C:C
?C8o,>C1C:C?b9b:C??C9C:C?o,C:o,C8b:CC8Cb9C?C:C:C8C8C8C:
C:C?C?C9
C<C?C8C:C?C?C;C8C?C?C?C;C:CC8C8C8C?CCC?C?C?CC8C?B?C<C?C?~C?B?C?C?C?C?C?C?
C/CC<C?C?C?C/C/CC?B?C?C?C?C/B?C?CC?C/CC?B?B?C/C/C?C?C/C?C/C/C/C?C?C?C
C/C?C/C?
C?C/C/C/C?B?B?C?C/C?C?C?C?B?C?C?C?C?B?C?C?C7C?C?C?C?C?C?C?C?C?C?C?C?C?B?B?C?C
?C?C?C?C?C?

... so I'm thinking, it's alive ... and not dead, but the terminal-settings
are incorrect. But I've tried the default and many other settings :-(

I've no idea anymore.

Thanks Michael

> Hi Suraj,
>
> thanks, but it doesn't help.
>
> I'm thinking, somebody had changed the serial connection and I don't
> think, that this configuration accepts keyboard-inputs as well.
>
> Normally "stop+n" resets the machine to the defaults, but what happen when
> no keyboard-input change my result.
>
> ???
>
> Michael
>>
>> Hi,
>> Press "stop+a" (without the quotes), u will be taken to ok prompt.
>> then type ok set-defaults
>>
>> This should serve ur purpose.
>>
>> Regards,
>>
>> Suraj.
>>
>> -----Original Message-----
>> From: Michael Karl [mailto:mk at lexcom-net.de]
>> Sent: Saturday, February 07, 2004 7:26 AM
>> To: sunhelp at sunhelp.org
>> Subject: [SunHELP] Problem with Netra t 1125
>>
>>> Hello,
>>>
>>> I got an used Netra t 1125 for testing.
>>>
>>> Problem: via "tip hardwire" (Null-Modem-Connection to an Ultra 10) I get
>>> only cryptical signs. The /etc/remote settings on Ultra 10 are correct.
>>> (docs.sun.com - Service Manual Netra t 1120/1125)
>>>
>>> I'm thinking, the OBP-settings on the Netra are modified.
>>>
>>> HOWTO: reset or restore the default factory setting ?:-(
>>> (With keyboard "stop+n" doesn't work)
>>>
>>> Thanks Michael
>>> _______________________________________________
>>> SunHELP maillist  -  SunHELP at sunhelp.org
>>> http://www.sunhelp.org/mailman/listinfo/sunhelp