[SunHELP] OBDIAG Ambient temperature to low on E450

[Predrag Zecevic]

Hi,

on out E450 is almost same: so it is normal....
Regards ;-)

Richard.Skelton at infineon.com wrote:

>Hi,
>It gives a similar result:-
>System Temperatures (Celsius):
>------------------------------
>AMBIENT    12
>CPU 0      42
>CPU 1      40
>CPU 2      40
>CPU 3      40
>=================================
>
>Cheers
>Richard.
>
>-----Original Message-----
>From: Predrag Zecevic [mailto:Predrag.Zecevic at 2e-systems.com] 
>Sent: 16 October 2003 14:24
>To: The SunHELP List
>Subject: Re: [SunHELP] OBDIAG Ambient temperature to low on E450
>
>
>Hi,
>
>why don't you cross-check with:
>/usr/platform/`uname -i`/sbin/prtdiag -v
>
>Rgds ;-)
>
>Skelton Richard (DC BRS) wrote:
>
>  
>
>>Hi,
>>I have an E450 which is showing an Enclosure Temperature = 11 deg.C which
>>    
>>
>is
>  
>
>>much lower than the room temperature.
>>Do I have problem with the sensor?
>>How do I fix it?
>>Where is it?
>>
>>Cheers
>>Richard.
>>
>>
>>____________________________________________________
>>|                             OBDiag - Version 4.5
>>|
>>|_________________________ ________________________
>>|                         |                         |
>>|
>>|  1 SUNW,envctrl at 14,60000|  2 TSI,gfxp at 4           |  3 ebus at 1
>>|
>>|  4 ecpp at 14,3043bc       |  5 eeprom at 14,0          |  6 fdthree at 14,3023f0
>>|
>>|  7 network at 1,1          |  8 scsi at 2               |  9 scsi at 3
>>|
>>| 10 se at 14,400000         | 11 su at 14,3062f8         | 12 su at 14,3083f8
>>|
>>|_________________________|_________________________|
>>|   Commands: test test-all except help what printenvs setenv versions exit
>>|
>>|____________________________________________________
>>
>>command> test 1
>>Hit the spacebar to interrupt testing
>>Testing /pci at 1f,4000/ebus at 1/SUNW,envctrl at 14,600000 
>>SUBTEST: init-i2c
>>SUBTEST: ambient-temp
>>Enclosure Temperature = 11 deg.C
>>SUBTEST: checking-cpus
>>SUNW,UltraSPARC-II CPU #0 Temperature = 40 deg.C, delta = 29 deg.C
>>SUNW,UltraSPARC-II CPU #1 Temperature = 40 deg.C, delta = 29 deg.C
>>SUNW,UltraSPARC-II CPU #2 Temperature = 40 deg.C, delta = 29 deg.C
>>SUNW,UltraSPARC-II CPU #3 Temperature = 40 deg.C, delta = 29 deg.C
>>SUBTEST: ps-fans
>>spin port data = de 
>>spin port data = f 
>>global-intr-port data  = 6f 
>>global-intr-port value is  = 7f 
>>fan data = f8 
>>fan data = f8 
>>fan data = f8 
>>SUBTEST: cpu-fans
>>spin port data = df 
>>spin port data = 11 
>>global-intr-port data  = 6f 
>>global-intr-port value is  = 7f 
>>fan data = c7 
>>fan data = c7 
>>fan data = c7 
>>SUBTEST: probe-power-supplies
>>Power Supply 0 : Present
>>SUBTEST: check-ps
>>SUBTEST: ps0-temp
>>Power Supply Inlet Temperature = 28 deg.C
>>Power Supply  +3.3V OR-ing Diode Temperature = 25 deg.C, delta = -3 deg.C
>>Power Supply  +5.0V OR-ing Diode Temperature = 28 deg.C, delta = 0 deg.C
>>Power Supply +12.0V OR-ing Diode Temperature = 25 deg.C, delta = -3 deg.C
>>Power Supply 1 : Present
>>SUBTEST: check-ps
>>SUBTEST: ps1-temp
>>Power Supply Inlet Temperature = 26 deg.C
>>Power Supply  +3.3V OR-ing Diode Temperature = 25 deg.C, delta = -1 deg.C
>>Power Supply  +5.0V OR-ing Diode Temperature = 26 deg.C, delta = 0 deg.C
>>Power Supply +12.0V OR-ing Diode Temperature = 26 deg.C, delta = 0 deg.C
>>Power Supply 2 : Present
>>SUBTEST: check-ps
>>SUBTEST: ps2-temp
>>Power Supply Inlet Temperature = 27 deg.C
>>Power Supply  +3.3V OR-ing Diode Temperature = 25 deg.C, delta = -2 deg.C
>>Power Supply  +5.0V OR-ing Diode Temperature = 26 deg.C, delta = -1 deg.C
>>Power Supply +12.0V OR-ing Diode Temperature = 24 deg.C, delta = -3 deg.C
>>SUBTEST: led-test
>>Middle Option Disks : Not there
>>Upper  Option Disks : Not there
>>Walking LEDs ..............
>>Selftest at /pci at 1f,4000/ebus at 1/SUNW,envctrl at 14,600000 passed
>>_______________________________________________
>>SunHELP maillist  -  SunHELP at sunhelp.org
>>http://www.sunhelp.org/mailman/listinfo/sunhelp
>>
>> 
>>
>>    
>>
>
>  
>

-- 
| Predrag Zecevic | e-Mail: Predrag.Zecevic at 2e-Systems.COM |
| 2e Systems GmbH |              Tel: (+49)[0]6107 989 415 |
|Im Taubengrund 12|              Fax: (+49)[0]6107 989 494 |
|65451 Kelsterbach|                                        |
|     Germany     |         Cellular: (+49)[0]174 3109 288 |
+=================+
"It's not just a computer -- it's your ass." -- Cal Keegan