[SunHELP] [ HOWTO ] - be sure if a device is detected
ptiJo ptiJo
ptiJo at noos.fr
Sun Feb 16 13:32:33 CST 2003
Hi,
I'm trying to use my Adaptec 29160 (SCSI Ultra160) on my Ultra5 and don't know how to make sure it is detected on Solaris 9.
Could anyone tell me if the 29160 is supported on SPARC ?
Having installed OpenBSD/sparc64, I saw it in the dmesg but it was "not configured" (ie, no driver for it) so I guess it could work...
I also found doc about ADP driver - are they only for Solaris/Intel ?
$ prtdiag -v
System Configuration: Sun Microsystems sun4u Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 333MHz)
System clock frequency: 83 MHz
Memory size: 256 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
--- --- ------- ----- ------ ------ ----
0 0 0 333 2.0 12 9.1
========================= IO Cards =========================
Bus# Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---- -------------------------------- ----------------------
0 PCI-1 33 1 ebus
0 PCI-1 33 1 network-SUNW,hme
0 PCI-1 33 2 SUNW,m64B ATY,GT-C
0 PCI-1 33 3 ide-pci1095,646.1095.646.3
0 PCI-2 33 1 pci-pci1011,24.3
0 PCI-2 33 3 scsi-pci9005,80.9005.e2a0.2
No failures found in System
===========================
========================= HW Revisions =========================
ASIC Revisions:
---------------
Cheerio: ebus Rev 1
FEPS: SUNW,hme Rev c1
System PROM revisions:
----------------------
OBP 3.31.0 2001/07/25 20:36 POST 3.1.0 2000/06/27 13:56
$ dmesg | egrep -i 'adp|adaptec|29160|scsi'
Feb 15 17:28:51 bagheera scsi: [ID 193665 kern.info] sd15 at uata0: target 2 lun 0
Feb 15 17:51:15 bagheera scsi: [ID 365881 kern.info] /pci at 1f,0/pci at 1/pci at 1/SUNW,isptwo at 4 (isp0):
Feb 15 17:51:15 bagheera scsi: [ID 193665 kern.info] sd15 at uata0: target 2 lun 0
Feb 15 17:51:41 bagheera scsi: [ID 193665 kern.info] sd15 at uata0: target 2 lun 0
More information about the SunHELP
mailing list