[SunHELP] Panic Issue on Sun Blade-100

[Zaheer Ahmed]

Hi all,
I have a problem with my Sun Blade-100 502 MHz CPU(1 only)/1408 MB RAM
Patch version 108528-09 running Solaris 8.
The machine crashes several times itself

Please have a look to the following /var/adm/messages

************************************************************************************************************

Feb  4 11:10:05 sb100 SUNW,UltraSPARC-IIe: [ID 392544 kern.warning]
WARNING: [AFT1] Uncorrectable Memory Error on CPU0 at TL=0, errID
0x00000385.085ff32f
Feb  4 11:10:05 sb100     AFSR 0x00000001<ME>.80300000<PRIV,UE,CE> AFAR
0x00000000.3effff18
Feb  4 11:10:05 sb100     AFSR.PSYND 0x0000(Score 05) AFSR.ETS 0x00
Fault_PC 0x1015a274
Feb  4 11:10:05 sb100     UDBH 0x03c4<UE,CE> UDBH.ESYND 0xc4 UDBL 0x0000

UDBL.ESYND 0x00
Feb  4 11:10:05 sb100     UDBH Syndrome 0xc4 Memory Module DIMM2
Feb  4 11:10:06 sb100 SUNW,UltraSPARC-IIe: [ID 511987 kern.info] [AFT2]
errID 0x00000385.085ff32f E$tag != PA from AFAR; E$line was victimized
Feb  4 11:10:06 sb100     dumping memory from PA 0x00000000.3effff00
instead
Feb  4 11:10:06 sb100 unix: [ID 836849 kern.notice]
Feb  4 11:10:06 sb100 ^Mpanic[cpu0]/thread=300012b17c0:
Feb  4 11:10:06 sb100 unix: [ID 914440 kern.notice] [AFT1] errID
0x00000385.085ff32f UE Error(s)
Feb  4 11:11:43 sb100 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm at 0

Feb  4 11:12:57 sb100 savecore: [ID 570001 auth.error] reboot after
panic: [AFT1] errID 0x00000385.085ff32f UE Error(s)
Feb  4 11:12:57 sb100     See previous message(s) for details
*************************************************************************************************************

I am running Oracle on this machine. The following settings has setup in

/etc/system.
**********************************************************************************

* Parameter Settings follow:
* --------------------------
set shmsys:shminfo_shmmax=2147483648
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=2048
set shmsys:shminfo_shmseg=32
set semsys:seminfo_semmni=4096
set semsys:seminfo_semmsl=200
set semsys:seminfo_semmap=4096
set semsys:seminfo_semmnu=4096
set semsys:seminfo_semume=64
set semsys:seminfo_semmns=4096
set semsys:seminfo_semopm=100
set semsys:seminfo_semvmx=32767
*==============================================================================

* End Oracle systems parameters
*==============================================================================



****************************************************************************

I don't find any hints on sunsolve.sun.com or access1.sun.com.

Could it be a CPU-modul-problem ? ... or memory ? ...

Thanks in advance,

Zaheer Ahmed
-----------------------------------------
Mobile Phone: (703) 869-9986
Email: zaheerahmed at earthlink.net
------------------------------------------