[SunHELP] Printer setup

[David Baldwin]

It depends on your printer.  On the hp laserjet there is a menu button.
>From there you can change the settings on the printer itself to send cr
and lf.
HTH=20
Dave

> -----Original Message-----
> From: Samson WK Cheung [mailto:samson.wk.cheung at db.com]
> Sent: Tuesday, October 23, 2001 3:10 AM
> To: sunhelp at sunhelp.org
> Subject: [SunHELP] Printer setup
>=20
> Hi All,
>=20
> I try to connect a solaris 2.6 server, named hkace1, to a network
printer
> named 'grc1604' with following commands
>=20
> /usr/sbin/lpadmin -x grc1064
> /usr/sbin/lpsystem -t bsd grc1064
> /usr/sbin/lpadmin -p grc1064 -s grc1064!hkace1
>=20
> It prints, however, the printout look like this:
>=20
> aaaaaaaaaaaaaaaaaaa
> <-   space       ->   bbbbbbbbbbbbbbbb
> <-              space               ->   ccccccccccccccccccccccccc
>=20
> What else from the command do I have to configure the printer's setup.
>=20
> Thx!
>=20
> Samson Cheung
>=20
>=20
>=20
> --
>=20
> This e-mail may contain confidential and/or privileged information. If
you
> are not the intended recipient (or have received this e-mail in error)
> please notify the sender immediately and destroy this e-mail. Any
> unauthorized copying, disclosure or distribution of the material in
this
> e-mail is strictly forbidden.
>=20
>=20
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp