[SunHELP] Invalid Sbus slot number 6

Matt Bettinger sunhelp at sunhelp.org
Sun Nov 18 11:52:57 CST 2001


Not too familair with the terms ds1 ds2..

here is what i have..


[|] [| [|]    [:]         [|]       [:]        [|]           [:]
o o o o
scsi ID   Prty   Term   Test   Block       Eject        DC Input

The pipe '|' denotes that the tines are jumpered and the ':'  represents an
unjumpered terminal.

Any ideas?

Matt


bran tregare wrote:

> how are your jumpers set on the plextor?  the blocksize jumper should be on
> and the parity jumper should be off, you should also have the cd set to ID
> 6 (ds 1 and ds2 jumpered, ds0 open.) also, you may need to remove the
> termination jumper on it, i've had ultra 1's (and 20's and 5's) fail to
> boot if the term jumper was active on the internal cdroms.
>
> At 03:57 AM 11/18/01 -0600, you wrote:
> >Hello,
> >
> >i still have an error and cannot get this sun ultra 2 to boot off of a
> >cdrom.  I have the cd's burned ok as far as i know.
> >
> >When i boot the machine the first line i see is 'Invalid sbus slot
> >number 6"  Has anyone ever seen this before?  The cdrom is a plextor and
> >it has the boot block jumper and a parity jumper and scsi ID jumpers.
> >The only devices on this machine are a scsi drive and the cdrom.  I have
> >the cdrom cables set up right (according to sun docs).
> >
> >I am at a loss here and this is my last resort before i either give this
> >machine away or sell it.  Does it sound like there is a hardware problem
> >,  conflict ?   Thank you for any help.
> >
> >Matt in Houston
> >
> >_______________________________________________
> >SunHELP maillist  -  SunHELP at sunhelp.org
> >http://www.sunhelp.org/mailman/listinfo/sunhelp
>
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp




More information about the SunHELP mailing list