[SunHELP] can not load drivers for /sbus at 2,0/SUNW,socal at d,100 00/sf at 0,0/ssd@ w21000020376244ab,0

[Devrim Yilmaz (Garanti Teknoloji)]

Hi all;
I fixed my problem with installing entire distribution instead of core
installation. Now again my question, why do you think i can't do core
installation to Sun Ent. 3500 machine. In my opinion, it needs some extra
driver packages and is there any way to supply that?

Regards,
dEVRim-

-----Original Message-----
From: ed at the7thbeer.com [mailto:ed at the7thbeer.com]
Sent: Wednesday, May 30, 2001 10:48 PM
To: Devrim Yilmaz (Garanti Teknoloji)
Subject: Re: [SunHELP] can not load drivers for
/sbus at 2,0/SUNW,socal at d,10000/sf at 0,0/ssd@ w21000020376244ab,0


At init level 0 (Open Firmware/Boot PROM) what is the output of printenv,
specifically the "boot-device" entry?  Also, are you trying to boot the
system off an external SSA or Ax000 FC-AL array?  Or are you trying to
boot off an internal disk.  Finally, are you or were you attempting to use
DiskSuite or Veritas Volume Manager to encapsulate/mirror/stripe/etc. a
root disk/boot volume?

===============================
Ed Mitchell (ed<-at->the7thbeer.com)
Finger for PGP public key
===============================
This boxen's uptime stats....
 12:45pm  up 7 day(s),  2:51,  2 users,  load average: 0.02, 0.01, 0.01


On Wed, 30 May 2001, Devrim Yilmaz (Garanti Teknoloji) wrote:

> Hi all;
> I try to install Solaris 8 to Ent 3500 using custom level. And i selected
to
> install as core but i failed twice and got the message below.
> Any ideas?
> 
> Regards.
> 
> ------------------------------------------------------
> Cannot load drivers for
> /sbus at 2,0/SUNW,socal at d,10000/sf at 0,0/ssd at w21000020376244ab,0
> Can't open boot device
> Type 'go' to resume 
> ok 
> 
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
>