[SunHELP] LinkSys Router with a Solaris Intel

[Les]

I had my home network set up using 10.18 addresses and when I
got my LinkSys I had to change to 192.
Just kept having problems even when addresses were hard
coded and the LinkSys knew about them.
Les
----- Original Message ----- 
From: <echase at postoffice.providence.edu>
To: <sunhelp at sunhelp.org>
Sent: Monday, June 25, 2001 4:40 AM
Subject: Re: [SunHELP] LinkSys Router with a Solaris Intel


192.168.1.1 is the gateway on my Windows machines at home 
that are behind a Linksys.

I've never worked with DHCP on a Solaris machine.  But now 
that you've got me thinking about it, it should be asking 
for the gateway address.  I didn't have to supply it to my 
Windows machines at home.



> On Mon, Jun 25, 2001 at 12:02:15AM +0000, 
echase at postoffice.providence.edu wrote:
> > Sounds like your gateway is not set properly.
> 
> yeah, that's what i thought.  but i'm thinking, shouldn't 
the LinkSys supply
> that since if the client is asking for DHCP we should 
assume that the client
> doesn't know our address?
> 
> > You're /etc/defaultgateway should be 192.168.1.1
> 
> is that the standard LinkSys IP range? (just curious for 
my own info)
> 
> -brian
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
> 


---------------------------------------------
This message was sent using Endymion MailMan.
http://www.endymion.com/products/mailman/


_______________________________________________
SunHELP maillist  -  SunHELP at sunhelp.org
http://www.sunhelp.org/mailman/listinfo/sunhelp