[Sunhelp] SM52X & Sparc 10

[Martin Wedel]

I'm grok'ing where you going with this, however, you set the jumpers in
accordance with the MBUS speed of the module, ie, no math on your part.

The following page has the jumper settings, 30-40 mhz are the choices in a
SS 10...

http://members.tripod.com/uutil/mbus/systems/sun/ss10.htm

Cheers!

--
Martin Wedel
sun at minor-element.net
http://www.minor-element.net/

On Sun, 29 Oct 2000, Greg wrote:

> > Which module is this? 501-xxxx?. I was testing one of the modules from my
> > 670MP, which is a SM512 (double wide, 50mhz with 1M cache each)(these
> > naming conventions are confusing) and it booted up properly in my SS10,
> > not sure of the boot prom revision. Looking at the MBBUS FAQs, I'm pretty
> > sure that none of these modules were rated at 80mhz bus speed, I believe
> > the SuperCache limited them to 40mhz.
> 
> Yes, but the clock on the motherboard is divided by two so it needs to be
> set for 80MHz, there's no 40MHz setting for it.
> 
> -greg
> 
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
>