[Sunhelp] E450 hangs after init 0 or init 6

[Michael Jonsson (BCT)]

Hi,

We had a problem with init 6 (reboot) on a 450. What caused our problem was that we had a terminal connected to the serial port and we used a simpel serial-cabel(only pin 2,3 and 7). (The 450 wanted some kind of handshake!?)

We switched to a "full" serial-cable and that solved our problem. 
I think you can set a tty parameter in the EEPROM to solve the problem, but I'm not sure.

/Micke



> -----Original Message-----
> From:	Miguel Demaerel [SMTP:Miguel.Demaerel at SGMS.SEMA.BE]
> Sent:	den 24 november 1999 12:14
> To:	@List SUN
> Subject:	[Sunhelp] E450 hangs after init 0 or init 6
> 
> Hoi 
> 
> Can someone please help me.
> 
> Sun E450 - Solaris 2.6
> OS + recommeded patches, Disksuit, sendmail are installed.
> The system is mirrored with Disksuite.
> 
> When I do an init 0 or init 6 the system hangs.
> I can't find any trace of it.
> 
> I have found a doc on SunSolve online, SRDB 133396.
> I have followed the solution, but it isn't a sollution for me.
> 
> Thanks in advance.
> 
> Greetings Miguel
> 
> 
>                    ////
>                   (o o)
> ==============oOO==(_)==OOo==============
>              Miguel DEMAEREL
>         Sema Group Managed Services
>        Raketstraat 98 - 1130 Brussel
>                  Belgium
>        Tel: +32 (0)2 724 93 17
>        Fax: +32 (0)2 724 92 92
>  EMail: Miguel.Demaerel at SGMS.SEMA.BE
> =========================================
> 
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp