[SPARCbook] RE:NetBSD-1.5 and SB3

[sparcbook at sunhelp.org]

>I said Xsun not xsun. That error means what it says though. Can you send
>a dmesg output to the list?

Ah, my apologies.  I do have Xsun.  dmesg output as follows:

NetBSD 1.5 (GENERIC) #1: Wed Nov 29 00:29:52 MET 2000
    root at flambard:/usr/src/sys/arch/sparc/compile/GENERIC
total memory = 65128 KB
avail memory = 57148 KB
using 839 buffers containing 3356 KB of memory
bootpath:
/iommu at 0,10000000/sbus at 0,10001000/espdma at 4,8400000/esp at 4,8800000/sd at 3,0
mainbus0 (root): Tadpole_S3
cpu0 at mainbus0: TMS390S10 @ 50 MHz, on-chip FPU
cpu0: physical 4K instruction (32 b/l), 2K data (16 b/l): cache enabled
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x202000: mk48t08 (eeprom)
timer0 at obio0 slot 0 offset 0xd00000 delay constant 23
zs0 at obio0 slot 0 offset 0x100000 level 12 powered via auxio2 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
kbd0 at zs1 channel 0 (console input)
ms0 at zs1 channel 1
slavioconfig at obio0 slot 0 offset 0x800000 not configured
auxreg0 at obio0 slot 0 offset 0x900000
auxiotwo0 at obio0 slot 0 offset 0x910000
tctrl0 at obio0 slot 0 offset 0xd1000020 level 11
tctrl0: main power available
clk-ctrl at obio0 slot 0 offset 0x3c0000 not configured
bt445 at obio0 slot 0 offset 0x380000 not configured
modem at obio0 slot 0 offset 0x3a0000 level 13 not configured
iommu0 at mainbus0 addr 0x10000000: version 0x1/0x4, page-size 4096, range
64MB
sbus0 at iommu0: clock = 25 MHz
p9000 at sbus0 slot 0 offset 0x100000 level 2 not configured
dma0 at sbus0 slot 4 offset 0x8400000: rev 2
esp0 at dma0 slot 4 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
bpp0 at sbus0 slot 4 offset 0xc800000 level 3: rev 2
ledma0 at sbus0 slot 4 offset 0x8400010: rev 2
le0 at ledma0 slot 4 offset 0x8c00000 level 6: address 00:00:83:a3:00:25
le0: 8 receive buffers, 2 transmit buffers
ts102 at sbus0 slot 1 offset 0x2000000 level 11 not configured
SUNW,DBRIs3 at sbus0 slot 2 offset 0x40 level 9 not configured
scsibus0: waiting 2 seconds for devices to settle...
probe(esp0:3:0): max sync rate 10.00MB/s
sd0 at scsibus0 target 3 lun 0: <IBM, DPRS-21215    !, S61B> SCSI2
0/direct fixed
sd0: 1160 MB, 2358 cyl, 16 head, 63 sec, 512 bytes/sect x 2376864 sectors
probe(esp0:6:0): max sync rate 10.00MB/s
cd0 at scsibus0 target 6 lun 0: <NEC, CD-ROM DRIVE:464, 1.04> SCSI2
5/cdrom removable
root on sd0a dumps on sd0b
root file system type: ffs


-------Patrick M Geahan------pmgeahan at home.com-------ICQ:3784715------
Quote of the Week: "Where in the bible does it say `God so loved the
world that he congested bandwidth by forwarding email to everyone in 
his address book?'" - Tom Sevart in alt.folklore.urban