[SPARCbook] Need Replacement Lexmark pointing device

[Ken Hansen]

If you have the 2 gig HD you don't need the adapter - you already have one!

You just need to open up the sled, remove the IDE drive from the adapter
and replace it with a bigger drive. Note: There may be a size limit
on the drive, 8 or 9 Gigs has been reportedto me...

Thanks, HTH,

Ken
n2vip at bellatlantic.net

> 
> I have a SparckBook 3 w/ 2 GB drive, 64 MB RAM and a dead battery, and defective pointer.  
> 
> The pointer is my main problem.  I lost side to side movement.  Tadpole wants me to return the unit, at some expense to refurbish it.  I ruled that option out due to cost.  I was unable to get a hold of anyone at Lexmart on this subject.  
> 
> An external Sun keyboard and mouse work fine, which lead me to conclude that the pointer itself is broken.  I found that taking Sparcbook apart was fairly easy.  So I tried cleaning the ribbon cable for this device without success.
> 
> Does anyone have this part for sale?  I need from the pointer back through the end of the ribbon cable.  I am going to talk to IBM next to see if their pointer come from Lexmart and if they sell this part.
> 
> Also, I am thinking oabout buying a 6 or 8 GB IDE drive and adapter.  Perhaps a group purchase would provide some leverage?  Anyone interested?
> 
> These seem to be the folks to talk to:  http://store.powerbook1.com/harddrives.html
> 
> Finally, I'd like to thank those who put the FAQ together.  Lots of good stuff in there.
> _______________________________________________
> Sparcbook mailing list  -  Sparcbook at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sparcbook
>