[rescue] StorEdge 3500 access

[Peter Stokes]

Hi Steve

Ok, glad you sorted it, I will let you have a link to the Sparc package when I
get a minute.

Peter

> On 27 Dec 2016, at 14:06, Steve Sandau <ssandau at gwi.net> wrote:
>
>> On 12/26/2016 05:34 PM, Peter Stokes wrote:
>> Hi Steve
>>
>> I can hunt the info out tomorrow as late now here in UK if no one comes up
>> with the info. The serial is normally set for 38400 baud and is different
>> pinout to the normal Sun console cable, from memory it has pins 2 and 3
>> reversed to standard, but do not quote me.....
>>
>> I can also hunt out the sccli package for the in band connection which
will
>> also allow you to set the array up as you mention.
>
> Peter,
>
> Thanks. I did finally manage to get in. I was searching my "archives" and
came up with a solaris boot CD that sets up a maintenance environment that
includes "sccli." I was able to use that to set up the "lan0" port on the
array so I can connect to it again.
>
> The bit about the cable being different fits what I saw elsewhere. I may try
the serial cable as well, just to see if I can make it work. The Portmaster
has a bunch of unused ports as well.
>
> The "sccli" I have is for Solaris x86, and my hosts are Solaris Sparc, and
Linux, so at some point, a copy if the sccli package for either of those would
probably be useful.
>
> For right now though, I have what I need to try and figure out the
configuration (again).
>
> Steve
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue