[rescue] Help with SunFire V240 Server

[Patrick Giagnocavo]

if you set up without networking and need to redo, you can either run
sys-unconfig and reboot, I think, or, you need to edit /etc/defaultrouter
and /etc/nsswitch.conf I think.


On Thu, Apr 11, 2013 at 10:29 AM, <microcode at zoho.com> wrote:

> On Thu, Apr 11, 2013 at 12:14:12PM -0400, Lionel Peterson wrote:
>
> > I was curious if I missed an option during the text install - I just
> went with
> > the auto-layout on one drive, since the install won't even last 24
> > hours...
>
> It's only been a couple of months or so but my memory is gone. Seems like
> Andrew is right on both counts, check the installation guide, but I'm
> pretty
> sure what he said about doing
>
> boot cdrom - text
>
> is correct. It should get you to an installer where you get the option to
> create a root mirror. And you can also zpool attach if you missed it on the
> installer, as he also said.
>
> auto layout on Solaris is fine, if you use ZFS for everything. I always
> select the [x] place /var on a separate ZFS filesystem option though.
>
> Have fun with your V240!
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue