[rescue] NVRAM (was Multia Question)

Paul Hortiatis ph009j at mail.rochester.edu
Tue Feb 18 19:00:15 CST 2003


Does any one know if it is possable to do it on older SGI systems?

Paul

-----Original Message-----
From: rescue-bounces at sunhelp.org [mailto:rescue-bounces at sunhelp.org]On
Behalf Of Curtis H. Wilbar Jr.
Sent: Tuesday, February 18, 2003 7:56 PM
To: rescue at sunhelp.org
Subject: Re: [rescue] NVRAM (was Multia Question)


Oh... was wondering if anyone has ever heard of anyone writing a
kernel module/etc to stop the clock on shutdown.  By putting NTP
on a box and have it doing ntpdate then having the clock keep correct
time when powered off is not necessary.

Anyone ever hear of anyone doing this ?

-- Curt

>X-Sender: wrmartin at incoming.verizon.net
>Date: Tue, 18 Feb 2003 18:51:25 -0500
>To: The Rescue List <rescue at sunhelp.org>
>From: Bill Martin <wrmartin at verizon.net>
>Subject: Re: [rescue] NVRAM (was Multia Question)
>X-Authentication-Info: Submitted using SMTP AUTH at pop016.verizon.net from
[207.68.59.167] at Tue, 18 Feb 2003 17:48:44 -0600
>
>>If you use a few commands at the open boot prompt you can stop the clock
>>and dramatically increase the shelf life of pulled chips, and installed
>>chips for systems that spend lots of time powered off....
>
>
>So what's the secret?  How does one stop the clock?
>
>Bill Martin
>_______________________________________________
>rescue list - http://www.sunhelp.org/mailman/listinfo/rescue


More information about the rescue mailing list