[rescue] Anyone know what this is?

Mike Still StillWaxin at Yahoo.com
Sun Mar 3 23:08:48 CST 2002


On Sun, 2002-03-03 at 23:41, Joshua D Boyd wrote:
> On Sun, Mar 03, 2002 at 09:43:08PM -0500, Patrick Giagnocavo wrote:
> 
> > > Does that mean that it is incapable of delivering more than 20megs per second?
> > > 
> > > mini-50 means scsi2 or fast scsi2, right?
> > 
> > Looking at the pictures and squinting a little, it looks like 68pin actually.
> > 
> > What is your opinion Joshua?
> 
> My understanding is that mini-50 means no more than fast-scsi2, which to my
> recal means no more than 10megs per second.  If it is 68pins, then I forget
> what that means, but I think it is either fast-wide-scsi2 at 20 megs, or
> Ultra-wide at 40 megs.  Not bad speeds, but less than 30 megs means no
> uncompressed video capture or playback, and less than 60 megs means no
> dual stream uncompressed video (which means compression is needed, which
> will seriously slow a machine down).  
> 
> This is why Onyx's have so many chanels and octanes meant for editing
> also have a lot of scsi chanels, or FC-AL.
> 
That system is what HP people call a Model 20, 20 for the # disks you
can stick in it.  There was a model 10 and 30 also, the 30 has fibre
channel connections on it, but the 10 and 20's were fast-wide-diff
(20mb/s).  To use that box you'd need a differential controller.  The
disks inside the unit are single ended fast scsi 50-pin though, so you
can put what you want in there as long as the firmware likes it.

> -- 
> Joshua D. Boyd
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue



More information about the rescue mailing list