[rescue] two SCSI oddities

[Dan Debertin]

David Rouse writes:

 > All four drives (narrow SCSI)  in the internal cage of my ss1000 have 
 > the "active termination enabled" jumper jumpered. Is this wrong then?

Check your sync-speed. Do a 'prtconf -v', and scroll down to your SCSI
bus (are SC1000's esp-based?). Your sync-speed will be shown in hex
under "name <targetN-sync-speed> length <4>".

For reference, 0x2710 is 10MB/s.

Dan
-- 
Dan Debertin
airboss at nodewarrior.org
www.nodewarrior.org

Writing software is more fun than working.