[SunRescue] in a panic

[Kevin Loch]

You can get a normal SS5 motherboard to do this by setting the jumpers
"wrong".  I have also had far too many ss5 DIMM's go bad.

KL

Ken Hansen wrote:
> 
> Try a DIMM at a time...
> 
> Also, are you sure the memory jumpers are correct for the SS/5-170? (Was the
> board working fine before the swap?) There are jumpers for speed/memory
> issues on the MB.
> 
> There is only one speed for SS/5 RAM, but some parts may be bad/out of
> spec...
> 
> HTH,
> 
> Ken
> 
> ----- Original Message -----
> From: "James Fogg" <jfogg at vicinity.com>
> To: <rescue at sunhelp.org>
> Sent: Sunday, May 06, 2001 1:52 PM
> Subject: [SunRescue] in a panic
> 
> > I just tried a motherboard swap in my SS5 (70mhz to a 170mhz). When
> booting, or
> > after running X for a few minutes I get something like:
> >
> > Panic, asynchronous memory fault
> > MFSR=81802860 MFAR=e744998.
> >
> > The MFSR and MFAR change each time.
> >
> > It writes core and reboots.
> >
> > Any ideas?
> >
> > I moved all the dram over from the 70mhz board. Could some be too slow?
> > _______________________________________________
> > rescue maillist  -  rescue at sunhelp.org
> > http://www.sunhelp.org/mailman/listinfo/rescue
> 
> _______________________________________________
> rescue maillist  -  rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue