[SunRescue] How to check a memory expansion board in SS670/MP

[Mike Nicewonger]

What slots do you have the VME boards in?

The CPU goes in slot 3, the first memory board goes in slot 1, the second
memory board would go in slot 5.

The big VME memory board also needs to be jumpered to the correct size IIRC

Mike N
----- Original Message -----
From: "Gaspar Gonzalez" <gaspar_gonzalez at hotmail.com>
To: <rescue at sunhelp.org>
Sent: Saturday, January 13, 2001 12:08 PM
Subject: [SunRescue] How to check a memory expansion board in SS670/MP


> Hi,
>    My SS670 reports 128Mb of RAM, the simms are on the system board, also
I
> have a memory expansion board with slot 0 populated (I think they're 4 MB
> simms maybe 1 Mb is this important?).
>
>    I know the system is not recognizing the RAM in the expansion board
> because with or without it is reporting 128 Mb.
>
> Is there anything to modify to get that memory reconized?
> How about a diagnostic command to verify if the memory expansion board is
> good and/or recognized by the system?
>
> Running 2.5.1
>
> Thanks!
> Gaspar G.
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
>