[SunRescue] ss20 error

[Gregory Leblanc]

> -----Original Message-----
> From: Chris Drelich [mailto:hyena at interport.net]
> Sent: Saturday, March 18, 2000 10:27 AM
> To: rescue at sunhelp.org
> Subject: [SunRescue] ss20 error
> 
> 
> Can someone tell me what this might mean, and how I might go 
> about fixing it? 
> This is on an ss20, the problem drive is a Seagate 
> Baracuda(ST39173WC), I've
> been trying many things and asking many people, and yet to 
> get a answer that
> gets it to work.  This hard drive is known to be working, so 
> thats not the
> problem. This is the error:
> 
> WARNING: 
> /iommu at f,e000000/sbus at f,e0001000/espdma at f,400000/esp at f,800000/sd at 1,0 :
>         Error for Command: load/start/stop        Error 
> Level: Retryable
>                                                               
>                 0
>         Vendor: SEAGATE                           Serial Number:
>         Sense Key: Not Ready
>         ASC: 0x4 (LUN not ready), ASCQ: 0x0, FRU: 0x2
> 
> 
> It does this a few times and then goes "offline."

Hmm, what are the jumpers set to on this drive?  That doesn't look to me
like an SCA part number, but I never can remember, maybe that's what the C
means...  Basically the error message is saying that the drive is not
replying to the load/start/stop commands.  How is the auto-start/spin-up
jumper set?  Try chaning that.  IIRC, the termination power jumper should be
removed on internal drives to the SS20, if the drive has one.  It's been a
while since I've played with those drives, so maybe they don't have
termpower.  
	Greg