[SunRescue] Pulling SIMMs (was Sparcstation with 0 MB (does it boot ?))

[Chris & Amy Petersen]

I'll "third" the dental pick.  Either a pick with a straight "L" hook or
better yet, a curved "C" style hook will work.  Picked mine up for like
$2.50 at a local discount store.

Chris

Nick Poolos wrote:
> 
> If you have to go with the needle nose pliers route, covering the tips with electrical tape helps.  This buys you a litte padding and will keep the pliers possible pouging up the cirucuit board.  Just be sure that you are gripping a trace and pull real hard.
> 
> NeXT's also used this type of SIMM socket.  They actually sold the "NeXT SIMM removal tool", a NeXT logoed dental pick.  So yes a dental pick is probably your best choice.  They should run ~$5 at a model railroad or other hobby shop.
> 
> --
> Nick
> 
> * Hatle, Steven J. (shatle at vue.com) [000310 11:14]:
> > I've always used a needle-nosed pliers and pulled straight up from one end.
> > Seems to have been OK.
> >
> > Steve
> >
> >
> >
> > I think the SS2 has the same slots as the IPC, which you ignore the little
> > clips, and pull the simm straight up out of the slots.  A steel hooked
> > dentist pick makes a great tool, just stick it through the hole in the
> > simm and pull.  I also have used a pair of pliers without any ill results,
> > but wouldn't recommend it if you had alternatives.  I think there is an
> > "official" tool with a Sun part number, but I have never seen one.
> >
> > Tim
> >
> >
> > _______________________________________________
> > Rescue maillist  -  Rescue at sunhelp.org
> > http://www.sunhelp.org/mailman/listinfo/rescue
> >
> > _______________________________________________
> > Rescue maillist  -  Rescue at sunhelp.org
> > http://www.sunhelp.org/mailman/listinfo/rescue
> 
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue