AW: [SunRescue] Max capacity of harddisk supported by SS20
ChrisDrelichhyena at interport.net
ChrisDrelichhyena at interport.net
Fri Jul 21 05:54:11 CDT 2000
% Executing command: df -k
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t0d0s0 43762 33719 5667 86% /
/dev/dsk/c0t0d0s6 263456 208241 28870 88% /usr
/proc 0 0 0 0% /proc
fd 0 0 0 0% /dev/fd
/dev/dsk/c0t0d0s3 29905 10779 16136 41% /var
/dev/dsk/c0t0d0s7 4136979 3546392 549218 87% /export/home
/dev/dsk/c0t0d0s5 3717657 2106813 1573668 58% /usr/local
/dev/dsk/c0t0d0s1 301411 188478 82792 70% /usr/openwin
swap 267392 288 267104 1% /tmp
The system is in use by ~50 people, and this has proven to be an alright setup
for it. What do you intend to use /opt for? I know this may be blasphemy, but
I've never been a big fan of /opt, I much prefer /usr/local. Do you intend to
install a lot of software? I assume this is for a desktop running X rather
then a server? I would definetly shrink /var and / I would remove /etc all
together, its a bad idea to have it seperated from /.
So ~50meg for / ~300 for /usr/openwin and no /etc partition. That saves you
550megs right there. If you get rid of opt(which I reccomend) you save another
2gigs. How large is your swap section? Do you intend to use your system as an
email or news server? If not shrink /var a LOT. /usr is probably about on target.
Chris
chris Gunther wrote:
>
> When I installed Solaris 8 it asked me what partitions
> I would like to have and gave me the opportunity to choose
> things like /usr /etc/ /tmp /export/home /opt /var /openwin
>
> I did not know anything about Solaris at this point (have
> always just used Linux) so I decided to choose everything
> that was possible. I have a 8GB HDD for Solaris and I used
>
> /usr 3 GB
> /opt 2 GB
> /openwin 512 MB
> /var 200 MB
> /etc 50 MB
> /tmp 200 MB
> / 500 MB
>
> and the rest for /export/home
>
> Now I'm wondering if that was maybe a bad idea. Am I wasting
> too much Diskspace???
>
> chris
>
> +---------------------------------+
> | chris |
> | ------------------------------- |
> | database design & programming |
> | agentur fiedler / video.de |
> | |
> | madram at video.de |
> +---------------------------------+
>
> -----Ursprungliche Nachricht-----
> Von: rescue-admin at sunhelp.org [mailto:rescue-admin at sunhelp.org]Im
> Auftrag von Camiel Vanderhoeven
> Gesendet: Freitag, 21. Juli 2000 08:49
> An: rescue at sunhelp.org
> Betreff: Re: [SunRescue] Max capacity of harddisk supported by SS20
>
> The way I see it, this is not a very good idea. The more you put in one
> filesystem, the greater the risk that the file system gets corrupted. By
> keeping
> all more or less frequently changing data on separate partitions (/home,
> /var,
> /usr, /opt), your chances of being left with an inoperable system are
> somewhat
> smaller. If you install a lot of free-/shareware software, keep your /usr
> partition large. If you use a lot of commercial Sun software, keep your /opt
> partition large.
>
> Camiel.
>
> Mike Hebel wrote:
>
> > Mostly so I don't have to worry about space restrictions for /var /usr
> /opt
> > etc.
> >
> > (Besides, kind of a moot point now - I partitioned the drive, just to be
> > safe, at 1.5G for / and the rest (- swap) as /opt. It's restoring from
> tape
> > now.)
> >
> > Is there something wrong with this or is this just "not a good idea"?
> >
> > Sincerely,
> >
> > Mike Hebel
> >
> > -----Original Message-----
> > From: rescue-admin at sunhelp.org [mailto:rescue-admin at sunhelp.org]On
> > Behalf Of Camiel Vanderhoeven
> > Sent: Thursday, July 20, 2000 12:15 PM
> > To: rescue at sunhelp.org
> > Subject: Re: [SunRescue] Max capacity of harddisk supported by SS20
> >
> > Why would you want a root partition of 4 GB???
> >
> > Mike Hebel wrote:
> >
> > > So basically the best course of action is to partition the 4gig into 2 -
> > > 2gig partitions or maybe a 1 and 3 combo.
> > >
> > > (Hmmm...I don't suppose OpenBoot PROM updates are available from Sun.)
> > >
> > > I guess I'll have to convince them to buy me an Ultra something then.
> > *grin*
> > >
> > > Sincerely,
> > >
> > > Mike Hebel
> > >
> > > -----Original Message-----
> > > From: rescue-admin at sunhelp.org [mailto:rescue-admin at sunhelp.org]On
> > > Behalf Of Gregory Leblanc
> > > Sent: Thursday, July 20, 2000 10:43 AM
> > > To: 'rescue at sunhelp.org'
> > > Subject: RE: [SunRescue] Max capacity of harddisk supported by SS20
> > >
> > > > -----Original Message-----
> > > > From: Mike Hebel [mailto:druaga at pmail.net]
> > > > Sent: Thursday, July 20, 2000 8:38 AM
> > > > To: rescue at ohno.mrbill.net
> > > > Subject: RE: [SunRescue] Max capacity of harddisk supported by SS20
> > > >
> > > > Is there a FAQ on Openboot Prom revisions? I have a SS5 with
> > > > a ROM of 2.15
> > > > and I'm about to re-partition (after backup) my 4 gig SCA
> > > > drive for more
> > > > space. (Newbieness caused me to break / and /opt into two separate
> > > > partitions.)
> > > >
> > > > Am I going to have a problem booting if I make it all one big
> > > > drive of about
> > > > 4gig?
> > >
> > > Possibly. If you happen to locate your kernel on the first 2GB of the
> > disk,
> > > then you won't have a problem. If you later patch the kernel, and it
> ends
> > > up after the first 2GB of disk, then you're SOL.
> > > I think that the 32-bit SPARCs can only address the first 2GB of disk.
> > The
> > > UltraSPARCs can address more.
> > > Grego
> > >
> > > > -----Original Message-----
> > > > From: rescue-admin at mrbill.net
> > > >
> > > > No, what he means is that the kernel does not suffer from the 2GB
> > > > boundary. It's the OpenBoot PROM (In PC terms: the BIOS). It can't see
> > > > the kernel file if it's beyond the 2GB limit. That means you're OK if
> > > > your root (/) partition is within the first 2GB of the disk.
> > > >
> > > > Guess wrote:
> > > >
> > > > > Hi Leblanc,
> > > > >
> > > > > Do u mean newer version of kernel will take care of
> > > > > the 2GB boundary ? May I know which version of kernel
> > > > > is recommended ? Thank you.
> > > > >
> > > > > --- Gregory Leblanc <GLeblanc at cu-portland.edu> wrote:
> > > > > > > -----Original Message-----
> > > > > > > From: Mike Nicewonger
> > > > > > [mailto:twmaster at twmaster.com]
> > > > > > >
> > > > > > > I do not know what the max capacity is but I do
> > > > > > know you can
> > > > > > > use a 9 GB disk
> > > > > > > in the 20.
> > > > > >
> > > > > > 18GB disks will also work internally, assuming that
> > > > > > you can find a 1" SCA
> > > > > > drive. The only issues are that the PROM can only
> > > > > > address 2GB of the disk,
> > > > > > so the kernel must be placed there to ensure that
> > > > > > things work properly.
> > > > > > Grego
> > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: Guess <guessfirst at yahoo.com>
> > > > > > >
> > > > > > > > Can someone pls tell me what is the maximum
> > > > > > > > harddisk(both internal & external) capacity
> > > > > > supported
> > > > > > > > by SparcStation 20 ? Can I use a 9GB(or even
> > > > > > bigger)
> > > > > > > > HD in this machine ? Thank you.
> > > _______________________________________________
> > > Rescue maillist - Rescue at sunhelp.org
> > > http://www.sunhelp.org/mailman/listinfo/rescue
> > >
> > > _______________________________________________
> > > Rescue maillist - Rescue at sunhelp.org
> > > http://www.sunhelp.org/mailman/listinfo/rescue
> >
> > _______________________________________________
> > Rescue maillist - Rescue at sunhelp.org
> > http://www.sunhelp.org/mailman/listinfo/rescue
> >
> > _______________________________________________
> > Rescue maillist - Rescue at sunhelp.org
> > http://www.sunhelp.org/mailman/listinfo/rescue
>
> _______________________________________________
> Rescue maillist - Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
More information about the rescue
mailing list