[SunRescue] newbie with SS10 problems. (lots of them!)

[Ken Hansen]

RAM should be added by filling the SIMM slots in sequence, moving away
from the SBUS slots toward the front of the unit - if you are looking at the

SS10 with the back/connectors facing you, start at the nearest slot and work

your way towards the front.

I assume this is known good RAM?

I assume you have a keyboard plugged in (no keys/no graphics - all info to
serial port)?

Was this a "known good" machine or a "removed working"?

HTH,

Ken

Eric Hall wrote:

> I can't get any video from my ss10 - I have a brand new Samsung
> multi-sync monitor with an 13w3 adapter.The monitor has a function that
> will display "out of sync" if that is the case. The monitor just stays
> in standby mode, and does nothing. I can hook up my linux laptop with a
> null-modem cable and get output.
>
> I'm also not sure what slots the simms go in. I have 4 16meg simms, and
> the only way I can get the thing to boot is put one on each end - I.E. 1
> and 8 slots. If someone could point me in the right direction I would
> appreciate it. pointers to faqs accepted with thanks.
>
> Eric Hall
>
> __________________________________________________
> Do You Yahoo!?
> Talk to your friends online with Yahoo! Messenger.
> http://im.yahoo.com
>
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue