[SunHELP] Removing CPU and memory

[Steve Sandau]

I belienve that memconf will do what you need. One location for it 
(first hit from Google, sounds familiar, too):

myweb.cableone.net/4schmidts/memconf.html

Steve

example:

# memconf
hostname: ba-steve
Sun Ultra 1 UPA/SBus (UltraSPARC 167MHz)
socket U0701 has a 128MB DIMM
socket U0601 has a 128MB DIMM
empty sockets: U0702 U0602 U0703 U0603 U0704 U0604
total memory = 256MB
#


Markham, Richard wrote:
> Seems that is not the case on the E420R, but that is ok I'll just pop the
> tops and get this documented.  
> Thanks for the help.
> 
> 
> 
> 
> /usr/platform/`uname -m`/sbin/prtdiag -v
> System Configuration:  Sun Microsystems  sun4u Sun Enterprise 420R
> (UltraSPARC-II 450MHz)
> System clock frequency: 113 MHz
> Memory size: 2048 Megabytes
> 
> ========================= CPUs =========================
> 
>                     Run   Ecache   CPU    CPU
> Brd  CPU   Module   MHz     MB    Impl.   Mask
> ---  ---  -------  -----  ------  ------  ----
>  0     3     3      450     4.0   US-II    10.0
> 
> 
> ========================= IO Cards =========================
> 
>      Bus   Freq
> Brd  Type  MHz   Slot  Name                              Model
> ---  ----  ----  ----  --------------------------------
> ----------------------
>  0   PCI    33     0   SUNW,qfe-pci108e,1001             SUNW,pci-qfe
> 
>  0   PCI    33     1   network-SUNW,hme
> 
>  0   PCI    33     1   SUNW,qfe-pci108e,1001             SUNW,pci-qfe
> 
>  0   PCI    33     1   fibre-channel-pci10df,f800.10df.+
> 
>  0   PCI    33     2   SUNW,qfe-pci108e,1001             SUNW,pci-qfe
> 
>  0   PCI    33     3   scsi-glm/disk (block)             Symbios,53C875
> 
>  0   PCI    33     3   scsi-glm/disk (block)             Symbios,53C875
> 
>  0   PCI    33     3   SUNW,qfe-pci108e,1001             SUNW,pci-qfe
> 
>  0   PCI    33     4   fibre-channel-pci10df,f800.10df.+
> 
>  0   PCI    33     5   SUNW,m64B                         SUNW,370-4362
> 
> 
> No failures found in System
> ===========================
> 
> ========================= HW Revisions =========================
> 
> ASIC Revisions:
> ---------------
> PCI: pci Rev 4
> Cheerio: ebus Rev 1
> 
> System PROM revisions:
> ----------------------
>   OBP 3.29.0 2000/12/20 18:40   POST 1.2.8 2000/08/22 19:50
> 
> -----Original Message-----
> From: Will Mc Donald [mailto:wmcdonald at ntlworld.com]
> Sent: Tuesday, November 04, 2003 2:53 PM
> To: The SunHELP List
> Subject: Re: [SunHELP] Removing CPU and memory
> 
> 
> Won't prtdiag give a good deal of the info you need?
> 
> /usr/platform/`uname -i`/sbin/prtdiag -v
> 
> e.g.
> 
> System Configuration:  Sun Microsystems  sun4u Sun Enterprise 450
> (UltraSPARC-II 296MHz)
> System clock frequency: 99 MHz
> Memory size: 1024 Megabytes
>        CPU Units: Frequency Cache-Size Version
>             A: MHz  MB  Impl. Mask  B: MHz  MB  Impl. Mask
>             ----------  ----- ----  ----------  ----- ----
>                                        296 2.0   11    2.0
> 
> 
> ========================= Memory =========================
> 
>        Interlv.  Socket   Size
> Bank    Group     Name    (MB)  Status
> ----    -----    ------   ----  ------
>   0      none      1901   256      OK
>   0      none      1902   256      OK
>   0      none      1903   256      OK
>   0      none      1904   256      OK
> 
> ======================IO Cards=========================================
> 
> 
>            UPA Device 0x1F  PCI Bus A (clock frequency: 66 MHz)
> 
>            UPA Device 0x1F  PCI Bus B (clock frequency: 33 MHz)
> 
> 
>            UPA Device 0x4  PCI Bus A (clock frequency: 66 MHz)
> 
>            UPA Device 0x4  PCI Bus B (clock frequency: 33 MHz)
> 
> 
>            UPA Device 0x6  PCI Bus A (clock frequency: 66 MHz)
> 
>            UPA Device 0x6  PCI Bus B (clock frequency: 33 MHz)
>                Slot 1: pf
> 
> 
> 
> ----- Original Message -----
> From: "Markham, Richard" <RLMarkham at hafeleamericas.com>
> To: "'The SunHELP List'" <sunhelp at sunhelp.org>
> Sent: Tuesday, November 04, 2003 7:23 PM
> Subject: RE: [SunHELP] Removing CPU and memory
> 
> 
> 
>>Is there a way to show memory slot usage and installed memory sizes from
>>command line?
>>
>>-----Original Message-----
>>From: Richard.Skelton at infineon.com [mailto:Richard.Skelton at infineon.com]
>>Sent: Tuesday, November 04, 2003 10:42 AM
>>To: sunhelp at sunhelp.org
>>Subject: RE: [SunHELP] Removing CPU and memory
>>
>>
>>No
>>
>>-----Original Message-----
>>From: sunhelp-bounces at sunhelp.org [mailto:sunhelp-bounces at sunhelp.org] On
>>Behalf Of Markham, Richard
>>Sent: 04 November 2003 15:32
>>To: 'sunhelp at sunhelp.org'
>>Subject: [SunHELP] Removing CPU and memory
>>
>>
>>I need to pull the CPU's and memory out of a system for use in another.
>>If I pull 8 of the 16 memory chips and 2 of the 3 CPU's, will I need
>>to set any jumpers?
>>
>>E420R
>>Solaris 8
>>
>>TIA
>>_______________________________________________
>>SunHELP maillist  -  SunHELP at sunhelp.org
>>http://www.sunhelp.org/mailman/listinfo/sunhelp
>>_______________________________________________
>>SunHELP maillist  -  SunHELP at sunhelp.org
>>http://www.sunhelp.org/mailman/listinfo/sunhelp
>>_______________________________________________
>>SunHELP maillist  -  SunHELP at sunhelp.org
>>http://www.sunhelp.org/mailman/listinfo/sunhelp
> 
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp