[SunHELP] Veritas VM help connecting to an ESS?

[sunhelp at sunhelp.org]

yes well not that its wrong you, but definately want to encompass ~more~.
Its stated though
to not use more than you need but I haven't had any issue with the following
sd.conf
which was generated by the package lpfc.  I dont know the details off hand
of how you
could immediately generate these entries shown in the second half of this
output.


~~~~~~~~~~~~~~~~~~~~~~~
#
# Copyright (c) 1992, by Sun Microsystems, Inc.
#
#ident  "@(#)sd.conf    1.9     98/01/11 SMI"

name="sd" class="scsi" class_prop="atapi"
        target=0 lun=0;

name="sd" class="scsi" class_prop="atapi"
        target=1 lun=0;

name="sd" class="scsi" class_prop="atapi"
        target=2 lun=0;

name="sd" class="scsi" class_prop="atapi"
        target=3 lun=0;

name="sd" class="scsi"
        target=4 lun=0;

name="sd" class="scsi"
        target=5 lun=0;

name="sd" class="scsi"
        target=6 lun=0;

name="sd" class="scsi"
        target=8 lun=0;

name="sd" class="scsi"
        target=9 lun=0;

name="sd" class="scsi"
        target=10 lun=0;

name="sd" class="scsi"
        target=11 lun=0;

name="sd" class="scsi"
        target=12 lun=0;

name="sd" class="scsi"
        target=13 lun=0;

name="sd" class="scsi"
        target=14 lun=0;

name="sd" class="scsi"
        target=15 lun=0;

# Start lpfc auto-generated configuration -- do NOT alter or delete this
line
# WARNING:  anything you put within this auto-generated section will
# be DELETED if you execute pkgrm to remove the lpfc driver package.
# You may need to add additional lines to probe for additional LUNs 
# or targets. You SHOULD delete any lines that represent lpfc targets 
# or LUNs that are not used. 
name="sd" parent="lpfc" target=0 lun=0;
name="sd" parent="lpfc" target=0 lun=1;
name="sd" parent="lpfc" target=1 lun=0;
name="sd" parent="lpfc" target=1 lun=1;
name="sd" parent="lpfc" target=2 lun=0;
name="sd" parent="lpfc" target=3 lun=0;
name="sd" parent="lpfc" target=4 lun=0;
name="sd" parent="lpfc" target=5 lun=0;
name="sd" parent="lpfc" target=6 lun=0;
name="sd" parent="lpfc" target=7 lun=0;
name="sd" parent="lpfc" target=8 lun=0;
name="sd" parent="lpfc" target=9 lun=0;
name="sd" parent="lpfc" target=10 lun=0;
name="sd" parent="lpfc" target=11 lun=0;
name="sd" parent="lpfc" target=12 lun=0;
name="sd" parent="lpfc" target=13 lun=0;
name="sd" parent="lpfc" target=14 lun=0;
name="sd" parent="lpfc" target=15 lun=0;
name="sd" parent="lpfc" target=16 lun=0;
name="sd" parent="lpfc" target=17 lun=0;
name="sd" parent="lpfc" target=17 lun=1;
name="sd" parent="lpfc" target=17 lun=2;
name="sd" parent="lpfc" target=17 lun=3;
# End lpfc auto-generated configuration -- do NOT alter or delete this line

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




-----Original Message-----
From: Tim Bingham [mailto:binghamt at upstate.edu]
Sent: Friday, July 25, 2003 12:17 PM
To: The SunHELP List
Subject: RE: [SunHELP] Veritas VM help connecting to an ESS?


I have the following two lines defined in sd.conf:

name="sd" parent="lpfc" target=0 lun=0;
name="sd" parent="lpfc" target=0 lun=1;

Maybe I have the target number wrong?

Thanks,
Tim


>Tim does your sd.conf have entries for lun>0 ? ie.
>name="sd" parent="lpfc" target=17 lun=0;
>name="sd" parent="lpfc" target=17 lun=1;
>name="sd" parent="lpfc" target=17 lun=2;
>name="sd" parent="lpfc" target=17 lun=3;
>
>I had a similar issue with the discovery part until I squared away the
>sd.conf file.

-- 
ooooooooooooooooooooooooooooooooooo

Tim Bingham
SUNY Upstate Medical University
binghamt at upstate.edu
_______________________________________________
SunHELP maillist  -  SunHELP at sunhelp.org
http://www.sunhelp.org/mailman/listinfo/sunhelp