[SunHELP] Tape drive problem

[Michael A. Turner]

	That was it, switched over to the in and the term lights came on and
it now operates correctly. Thanks guys.

Michael A. Turner
Systems Engineer WHRO
michael.turner at whro.org
http://www.whro.org


> -----Original Message-----
> From: Larry Snyder [mailto:larrys at lexisnexis.com]
> Sent: Tuesday, August 26, 2003 2:06 PM
> To: sunhelp at sunhelp.org
> Subject: RE: [SunHELP] Tape drive problem
> 
> 
> "Michael A. Turner" <mturner at whro.org> wrote:
> > 	I Popped down to the NOC and took a look physically at 
> the drive. It
> > is actually a 611 case. It has an auto term light on teh 
> back labeled low
> > and high but neither is lit up. the SCSI cable connecting 
> it to the system
> > is connected to the connector labeled out. Is all this 
> correct or do I need
> > to change something?                  ^^^
> 
> Start w/ the scsi connector....
> -ls-
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp