[SunHELP] hard coding qfe interfaces to 100 Full and Half Duplex

[duke.glover at verizon.com]

Hello SUN gods,

Normally my situation requires that I hardcode ALL of my qfe interfaces to
100 Full.  To do this is I use these entries at the bottom of my
/etc/system file:

#Set qfe to 100mb fdx and no autoneg
set qfe:qfe_adv_autoneg_cap=0
set qfe:qfe_adv_100T4_cap=0
set qfe:qfe_adv_100fdx_cap=1
set qfe:qfe_adv_100hdx_cap=0
set qfe:qfe_adv_10fdx_cap=0
set qfe:qfe_adv_10hdx_cap=0


My problem is this.  I now have a need to hardcode

qfe0 to 100 Full
qfe1 to 100 Half
qfe2 to 100 Full

The above edit to the /etc/system file hardcodes all the qfe interfaces to
100 Full so I can't use that.

Any ideas,

Duke Glover
*******************************************