[SunHELP] [Q] probe-scsi-all error on E280R?

[L]

It does NOT work.  I power down server for 5 minutes then retried.  It
still the same.



On Mon, 30 Jul 2001 Dave.Zarnoch at sungard.com wrote:

> 
> I saw this:
> 
>                                                                             
>  This behavior was root-caused to the "retained memory" bug in which        
>  the OBP's retained memory magic number was not going away during           
>  a quick power cycle.  Memory did not degrade for up to 30-40 seconds       
>  after power-off.                                                           
>                                                                             
>  The suggestion is to wait more than 30 seconds after power down.           
>                                                                             
>  Dave Zarnoch                                                               
>  UNIX Systems Administration                                                
>  SunGard eSourcing                                                          
>  600 Laurel Oak Rd.                                                         
>  Voorhees, NJ 08043                                                         
>  Dave.Zarnoch at sungard.com                                                   
>                                                                             
>                                                                             
> 
> 
> 
> 
> 
>                                                                                                                 
>                     L                                                                                           
>                     <leed at chele.cai        To:     sunhelp at sunhelp.org, sunmanagers at sunmanagers.org             
>                     s.net>                 cc:                                                                  
>                     Sent by:               Subject:     [SunHELP] [Q] probe-scsi-all error on E280R?            
>                     sunhelp-admin at s                                                                             
>                     unhelp.org                                                                                  
>                                                                                                                 
>                                                                                                                 
>                     07/30/2001                                                                                  
>                     08:46 AM                                                                                    
>                     Please respond                                                                              
>                     to sunhelp                                                                                  
>                                                                                                                 
>                                                                                                                 
> 
> 
> 
> 
> I tried to use "probe-scsi-all" command on E280R "Ok" mode and have errors
> come out.
> 
>  OK  setenv auto_boot? false
>  OK  reset
>  OK  probe-scsi-all
>    Fatal SCSI at script address 8 illegal instruction
> 
>    Fatal SCSI at script address 8 illegal instruction
>                    ...
> 
> 
> Does anyone know why?
> 
> Thanks.
> 
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
> 
> 
> 
> 
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
>