[SunHELP] [Q] probe-scsi-all error on E280R?

[Miroszlav Moricz]

Hi!

Check the SCSI IDs, and then try it again!
the 7 is the BUS's id, and above 7 ids are only used with ultra wide BUS's.

Regards Miro

On Tue, 31 Jul 2001 17:15:16 -0400 (EDT), sunhelp at sunhelp.org wrote:

>  It does NOT work.  I power down server for 5 minutes then retried.  It
>  still the same.
>  
>  
>  
>  On Mon, 30 Jul 2001 Dave.Zarnoch at sungard.com wrote:
>  
>  > 
>  > I saw this:
>  > 
>  >                                                                        

>  >  This behavior was root-caused to the "retained memory" bug in which   

>  >  the OBP's retained memory magic number was not going away during      

>  >  a quick power cycle.  Memory did not degrade for up to 30-40 seconds  

>  >  after power-off.                                                      

>  >                                                                        

>  >  The suggestion is to wait more than 30 seconds after power down.      

>  >                                                                        

>  >  Dave Zarnoch                                                          

>  >  UNIX Systems Administration                                           

>  >  SunGard eSourcing                                                     

>  >  600 Laurel Oak Rd.                                                    

>  >  Voorhees, NJ 08043                                                    

>  >  Dave.Zarnoch at sungard.com                                              

>  >                                                                        

>  >                                                                        

>  > 
>  > 
>  > 
>  > 
>  > 
>  >                                                                        

>  >                     L                                                  

>  >                     <leed at chele.cai        To:     sunhelp at sunhelp.org,
sunmanagers at sunmanagers.org             
>  >                     s.net>                 cc:                         

>  >                     Sent by:               Subject:     [SunHELP] [Q]
probe-scsi-all error on E280R?            
>  >                     sunhelp-admin at s                                    

>  >                     unhelp.org                                         

>  >                                                                        

>  >                                                                        

>  >                     07/30/2001                                         

>  >                     08:46 AM                                           

>  >                     Please respond                                     

>  >                     to sunhelp                                         

>  >                                                                        

>  >                                                                        

>  > 
>  > 
>  > 
>  > 
>  > I tried to use "probe-scsi-all" command on E280R "Ok" mode and have
errors
>  > come out.
>  > 
>  >  OK  setenv auto_boot? false
>  >  OK  reset
>  >  OK  probe-scsi-all
>  >    Fatal SCSI at script address 8 illegal instruction
>  > 
>  >    Fatal SCSI at script address 8 illegal instruction
>  >                    ...
>  > 
>  > 
>  > Does anyone know why?
>  > 
>  > Thanks.
>  > 
>  > _______________________________________________
>  > SunHELP maillist  -  SunHELP at sunhelp.org
>  > http://www.sunhelp.org/mailman/listinfo/sunhelp
>  > 
>  > 
>  > 
>  > 
>  > _______________________________________________
>  > SunHELP maillist  -  SunHELP at sunhelp.org
>  > http://www.sunhelp.org/mailman/listinfo/sunhelp
>  > 
>  
>  _______________________________________________
>  SunHELP maillist  -  SunHELP at sunhelp.org
>  http://www.sunhelp.org/mailman/listinfo/sunhelp





_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/