[SunHELP] DiskSuite

[Magnus Abrante]

Hi

You have probably created the metadevice d11 from a slice which starts with 
cylinder 0, and now you are trying to attach another metadevice which does
not start with cylinder 0 to it.

Disksuite wont allow that in order to prevent the disk labels from being 
corrupted.

You'll have to recreate d11 so it startes with cylinder 0.

        //Magnus Abrante
/* This is my opinion and not the one of my empolyer */


> Hello,
> 
>    I am getting an error when trying to mirror / partition.  I am able to 
> make the two submirrors (one of the / file system and one on the mirror 
> disk.  Then I make the one way mirror with the first submirror and 
> reboot....everything ok.  When I try to make it a two way mirror with my 
> second submirror I get the error:
> # metattach d10 d12
> metattach: harpua: d12: can't attach labeled submirror to an unlabeled mirror
> 
> d10: Mirror
>      Submirror 0: d11
>        State: Okay
>      Pass: 1
>      Read option: roundrobin (default)
>      Write option: parallel (default)
>      Size: 2945376 blocks
> 
> d11: Submirror of d10
>      State: Okay
>      Size: 2945376 blocks
>      Stripe 0:
>          Device              Start Block  Dbase State        Hot Spare
>          c0t0d0s0                   0     No    Okay
> 
> 
> d12: Concat/Stripe
>      Size: 2949712 blocks
>      Stripe 0:
>          Device              Start Block  Dbase
>          c1t1d0s0                   0     No
> 
>    What does this mean?
> 
> Thanks,
> Bob Ababurko
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp