[Sunhelp] Booting E4500 from D1000s

[Reagen Ward]

I just adjust the diag-device setting to match boot-device, that way I can watch
the pretty stuff scroll by when it boots in diag mode and still boot just fine.

On Wed, Sep 06, 2000 at 06:07:53PM -0400, Dale Ghent wrote:
> 
> Try:
> 
> setenv diag-switch? false
> reset
> 
> If diag-switch is set to true, it'll try to boot from the net, no matter
> what boot-file says.
> 
> /dale
> 
> 
> On Wed, 6 Sep 2000, Brian Canada wrote:
> 
> | I'm at a loss here, any help would be appreciated.
> | 
> | I'm trying to boot off of a D1000s and it continues to try to boot from the network.   Here's what I've got....
> | 
> | {0} ok probe-scsi-all
> | /sbus at 3,0/SUNW,fas at 3,8800000
> | Target 6 
> |   Unit 0   Removable Read Only device     TOSHIBA XM6201TASUN32XCD110312/12/97
> |                                                                                     
> | /sbus at 2,0/QLGC,isp at 1,10000
> | Target 0 
> |   Unit 0   Disk     FUJITSU MAG3091L SUN9.0G11110018456766
> | Target 1 
> |   Unit 0   Disk     FUJITSU MAG3091L SUN9.0G11110018456699
> | Target e 
> |   Unit 0   Processor     SYMBIOS D1000           2   N     SAF-TE1.00
> | 
> | {0} ok show-disks
> | a) /sbus at 3,0/SUNW,fas at 3,8800000/sd
> | b) /sbus at 2,0/QLGC,isp at 1,10000/sd
> | c) /sbus at 2,0/SUNW,socal at d,10000/sf at 1,0/ssd
> | d) /sbus at 2,0/SUNW,socal at d,10000/sf at 0,0/ssd
> | q) NO SELECTION 
> | Enter Selection, q to quit: 
> | 
> | bootdisk                 /sbus at 2,0/QLGC,isp at 1,10000/sd at 0,0
> | disk                     /sbus at 3,0/SUNW,fas at 3,8800000/sd at 0,0
> | diskbrd                  /sbus at 3,0/SUNW,fas at 3,8800000/sd at a,0
> | diskisp                  /sbus at 3,0/QLGC,isp at 0,10000/sd at 0,0
> | net                      /sbus at 3,0/SUNW,hme at 3,8c00000
> | cdrom                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 6,0:f
> | tape                     /sbus at 3,0/SUNW,fas at 3,8800000/st at 4,0
> | scsi                     /sbus at 3,0/SUNW,fas at 3,8800000
> | disk0                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 0,0
> | disk1                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 1,0
> | disk2                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 2,0
> | disk3                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 3,0
> | disk4                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 4,0
> | disk5                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 5,0
> | tape0                    /sbus at 3,0/SUNW,fas at 3,8800000/st at 4,0
> | tape1                    /sbus at 3,0/SUNW,fas at 3,8800000/st at 5,0
> | ttya                     /central/fhc/zs at 0,902000:a
> | ttyb                     /central/fhc/zs at 0,902000:b
> | keyboard                 /central/fhc/zs at 0,904000
> | keyboard!                /central/fhc/zs at 0,904000:forcemode
> | 
> | {0} ok printenv boot-device
> | boot-device =         bootdisk
> | {0} ok 
> | 
> | 
> | 8-slot Sun Enterprise E4500/E5500, No Keyboard
> | OpenBoot 3.2.26, 4096 MB memory installed, Serial #15561529.
> | Copyright 2000 Sun Microsystems, Inc.  All rights reserved
> | Ethernet address 8:0:20:ed:73:39, Host ID: 80ed7339.
> | Boot device: net  File and args: 
> | Using Onboard Transceiver - Link Up. 
> | Timeout waiting for ARP/RARP packet
> | Timeout waiting for ARP/RARP packet
> | Timeout waiting for ARP/RARP packet
> | 
> | 
> | Thanks
> | 
> | H. Brian Canada
> | Unix Systems Administrator
> | Dallas Semiconductor
> | _______________________________________________
> | SunHELP maillist  -  SunHELP at sunhelp.org
> | http://www.sunhelp.org/mailman/listinfo/sunhelp
> | 
> 
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp