[Sunhelp] Booting E4500 from D1000s

[Brian Canada]

I'm at a loss here, any help would be appreciated.

I'm trying to boot off of a D1000s and it continues to try to boot from the network.   Here's what I've got....

{0} ok probe-scsi-all
/sbus at 3,0/SUNW,fas at 3,8800000
Target 6 
  Unit 0   Removable Read Only device     TOSHIBA XM6201TASUN32XCD110312/12/97
                                                                                    
/sbus at 2,0/QLGC,isp at 1,10000
Target 0 
  Unit 0   Disk     FUJITSU MAG3091L SUN9.0G11110018456766
Target 1 
  Unit 0   Disk     FUJITSU MAG3091L SUN9.0G11110018456699
Target e 
  Unit 0   Processor     SYMBIOS D1000           2   N     SAF-TE1.00

{0} ok show-disks
a) /sbus at 3,0/SUNW,fas at 3,8800000/sd
b) /sbus at 2,0/QLGC,isp at 1,10000/sd
c) /sbus at 2,0/SUNW,socal at d,10000/sf at 1,0/ssd
d) /sbus at 2,0/SUNW,socal at d,10000/sf at 0,0/ssd
q) NO SELECTION 
Enter Selection, q to quit: 

bootdisk                 /sbus at 2,0/QLGC,isp at 1,10000/sd at 0,0
disk                     /sbus at 3,0/SUNW,fas at 3,8800000/sd at 0,0
diskbrd                  /sbus at 3,0/SUNW,fas at 3,8800000/sd at a,0
diskisp                  /sbus at 3,0/QLGC,isp at 0,10000/sd at 0,0
net                      /sbus at 3,0/SUNW,hme at 3,8c00000
cdrom                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 6,0:f
tape                     /sbus at 3,0/SUNW,fas at 3,8800000/st at 4,0
scsi                     /sbus at 3,0/SUNW,fas at 3,8800000
disk0                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 0,0
disk1                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 1,0
disk2                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 2,0
disk3                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 3,0
disk4                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 4,0
disk5                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 5,0
tape0                    /sbus at 3,0/SUNW,fas at 3,8800000/st at 4,0
tape1                    /sbus at 3,0/SUNW,fas at 3,8800000/st at 5,0
ttya                     /central/fhc/zs at 0,902000:a
ttyb                     /central/fhc/zs at 0,902000:b
keyboard                 /central/fhc/zs at 0,904000
keyboard!                /central/fhc/zs at 0,904000:forcemode

{0} ok printenv boot-device
boot-device =         bootdisk
{0} ok 


8-slot Sun Enterprise E4500/E5500, No Keyboard
OpenBoot 3.2.26, 4096 MB memory installed, Serial #15561529.
Copyright 2000 Sun Microsystems, Inc.  All rights reserved
Ethernet address 8:0:20:ed:73:39, Host ID: 80ed7339.
Boot device: net  File and args: 
Using Onboard Transceiver - Link Up. 
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet


Thanks

H. Brian Canada
Unix Systems Administrator
Dallas Semiconductor