[Sunhelp] Ultra 10 - Red State Exception

[Martin Wedel -SR]

Hi, 
  Just got an Ultra 10 with the 333mhz proc from work to use, however, I
cannot get it to
boot. No output to video, however, when I hook a console to com A I get
this ::
@(#) Sun Ultra 5/10 UPA/PCI  3.15 Version 2 created 1998/11/10 10:35
Clearing E$ Tags  Done
Clearing I/D TLBs Done
Probing Memory Done
MEM BASE = 0000.0000.1000.0000
MEM SIZE = 0000.0000.1000.0000
11-Column Mode Enabled 
MMUs ON
Copy Done
PC = 0000.01ff.f000.1fec
PC = 0000.0000.0000.2030
Decompressing into Memory Done
Size = 0000.0000.0006.e660
ttya initialized
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0 
UltraSPARC-IIi 2-2 module

RED State Exception

TL=0000.0000.0000.0005 TT=0000.0000.0000.000a
   TPC=0000.0000.f000.4140 TnPC=0000.0000.f000.4144
TSTATE=0000.0044.1500.1500
TL=0000.0000.0000.0004 TT=0000.0000.0000.000a
   TPC=0000.0000.f000.4140 TnPC=0000.0000.f000.4144
TSTATE=0000.0044.1500.1500
TL=0000.0000.0000.0003 TT=0000.0000.0000.000a
   TPC=0000.0000.f000.4140 TnPC=0000.0000.f000.4144
TSTATE=0000.0044.1500.1500
TL=0000.0000.0000.0002 TT=0000.0000.0000.000a
   TPC=0000.0000.f000.3000 TnPC=0000.0000.f000.3000
TSTATE=0000.0044.1500.1500
TL=0000.0000.0000.0001 TT=0000.0000.0000.0032
   TPC=0000.0000.f002.7eb0 TnPC=0000.0000.f000.8080
TSTATE=0000.0044.1500.1600

the Red State Exception error continues to repeat.
At one point I got an 'ok' prompt, but whenever I attempted to enter a
command, it returned 'Fast Data Access MMU Miss'

Am i SOL?

--
Martin Wedel
sun at minor-element.net
http://www.minor-element.net/